65,209
社区成员
发帖
与我相关
我的任务
分享64位的CentOS装64位的Win7,说VT模式没有被启动，但BIOS里面已经启用了VT-X
VMware的提示信息如下：
This host supports Intel VT-x, but Intel VT-x is disabled.
Intel VT-x might be disabled if it has been disabled in the BIOS/firmware settings or the host has not been power-cycled since changing this setting.
(1) Verify that the BIOS/firmware settings enable Intel VT-x and disable 'trusted execution.'
(2) Power-cycle the host if either of these BIOS/firmware settings have been changed.
(3) Power-cycle the host if you have not done so since installing VMware Workstation.
(4) Update the host's BIOS/firmware to the latest version.
The virtual machine you are attempting to restore is in 64-bit mode, but your host does not support 64-bit VMs.
An error occurred while restoring the virtual machine state from file "/home/Jtian/Software/os_test/Other Linux 2.6.x kernel 64-bit-f055a8c1.vmss".
An error caused the resume operation to fail. Preserve the suspended state and correct the error, or discard the suspended state.
华硕的主板,BIOS里面显示VT-X已经被启用了；
64位的CentOS;
VMWare10.0.1也是64位的
“Power-cycle the host”什么意思啊，CentOS的firmware该怎么设置啊？
This host supports Intel VT-x, but Intel VT-x is disabled.
Intel VT-x might be disabled if it has been disabled in the BIOS/firmware settings or the host has not been power-cycled since changing this setting.
(1) Verify that the BIOS/firmware settings enable Intel VT-x and disable 'trusted execution.'
(2) Power-cycle the host if either of these BIOS/firmware settings have been changed.
(3) Power-cycle the host if you have not done so since installing VMware Workstation.
(4) Update the host's BIOS/firmware to the latest version.
The virtual machine you are attempting to restore is in 64-bit mode, but your host does not support 64-bit VMs.
An error occurred while restoring the virtual machine state from file "/home/Jtian/Software/os_test/Other Linux 2.6.x kernel 64-bit-f055a8c1.vmss".
An error caused the resume operation to fail. Preserve the suspended state and correct the error, or discard the suspended state.
华硕的主板,BIOS里面显示VT-X已经被启用了；
64位的CentOS;
VMWare10.0.1也是64位的
“Power-cycle the host”什么意思啊，CentOS的firmware该怎么设置啊？
...全文
请发表友善的回复…
发表回复
ws8934792 2015-11-06
- 打赏
- 举报
刚测的新方法，虽然很奇芭，但是很管用，相信我来的不晚，这个方法比较难找。所以特意上来发扬一下。。
重启
进入BOIS，关闭VT，保存重启
到了进入BOIS界面，直接按主机重启键，，然后再按关机
然后再次开机，进入BOIS，开启VT，保存重启
到了进入BOIS界面，直接按主机重启键，，然后再按关机
然后启动计算机。就搞定了
我刻意又重启了次，VT依旧是开启的
其中原理我就不知道了
这个方法主要针对，开启了VT，但是cpu-V依旧显示未开启的人
澈 2015-09-20
- 打赏
- 举报
把所有杀毒软件卸载掉看看吧
jren_nanjing 2014-01-21
- 打赏
- 举报
坑了，坑了，原来还是BIOS里的虚拟化没有开启造成的，郁闷啊。华硕的这个BIOS控制界面太高级了，图形化的，页面好大，下面还有没有显示的内容，看到的只是CPU支持VT-X，但是下面的一次性看不到的内容是虚拟化是关闭的，。。。我觉得这尼玛太坑了。。。。
Monkey_Online 2014-01-21
- 打赏
- 举报
坑了，坑了，原来还是BIOS里的虚拟化没有开启造成的，郁闷啊。华硕的这个BIOS控制界面太高级了，图形化的，页面好大，下面还有没有显示的内容，看到的只是CPU支持VT-X，但是下面的一次性看不到的内容是虚拟化是关闭的，。。。我觉得这尼玛太坑了。。。。[/quote]
哈哈，解决了就好。
jren_nanjing 2014-01-17
- 打赏
- 举报
谢谢你的回答~~
不过我的状况和他是不一样的，他的情况是BIOS里VT被禁用(disable)了，而我的BIOS里VT是开启的。
(实际上现在的电脑的大多支持VT了，台式机的BIOS默认开启VT，而笔记本的BIOS则默认禁用VT。)
Monkey_Online 2014-01-17
- 打赏
- 举报
"Power-cycle the host" 是指：重启机器。至于下面的请看下面这篇博文：
http://blog.csdn.net/peisl/article/details/6923146
希望可以帮助你。
