精华内容
下载资源
问答
  • IPMI

    2019-11-17 07:54:02
    IPMI设置与使用(远程控制服务器) 参考:http://smilejay.com/2011/09/ipmi/

    IPMI设置与使用(远程控制服务器)

     

     

    参考:http://smilejay.com/2011/09/ipmi/

    展开全文
  • ipmi

    2015-02-08 14:02:00
    linux-xen02:~ # /etc/init.d/ipmi status ipmi_msghandler module loaded. ipmi_si module loaded. ipmi_devintf module loaded. /dev/ipmi0 exists. linux-datastore:~ # lsmod |grep ipmi ipmi...
    是否启动检查
    linux-xen02:~ # /etc/init.d/ipmi status
    ipmi_msghandler module loaded.
    ipmi_si module loaded.
    ipmi_devintf module loaded.
    /dev/ipmi0 exists.
    
    linux-datastore:~ # lsmod |grep ipmi
    ipmi_devintf           17509  0 
    ipmi_si                53294  0 
    ipmi_msghandler        49895  2 ipmi_devintf,ipmi_si
    linux-datastore:~ # lsmod |grep ipmi|wc -l
    
    电源操作
    linux-xen02:~ # ipmitool chassis 
    Chassis Commands:  status, power, identify, policy, restart_cause, poh, bootdev, bootparam, selftest
    
    raw           Send a RAW IPMI request and print response
    i2c           Send an I2C Master Write-Read command and print response
    spd           Print SPD info from remote I2C device
    lan           Configure LAN Channels
    chassis       Get chassis status and set power state
    power         Shortcut to chassis power commands
    event         Send pre-defined events to MC
    mc            Management Controller status and global enables
    sdr           Print Sensor Data Repository entries and readings
    sensor        Print detailed sensor information
    fru           Print built-in FRU and scan SDR for FRU locators
    gendev        Read/Write Device associated with Generic Device locators sdr
    sel           Print System Event Log (SEL)
    pef           Configure Platform Event Filtering (PEF)
    sol           Configure and connect IPMIv2.0 Serial-over-LAN
    tsol          Configure and connect with Tyan IPMIv1.5 Serial-over-LAN
    isol          Configure IPMIv1.5 Serial-over-LAN
    user          Configure Management Controller users
    channel       Configure Management Controller channels
    session       Print session information
    sunoem        OEM Commands for Sun servers
    kontronoem    OEM Commands for Kontron devices
    picmg         Run a PICMG/ATCA extended cmd
    fwum          Update IPMC using Kontron OEM Firmware Update Manager
    firewall      Configure Firmware Firewall
    delloem       OEM Commands for Dell systems
    shell         Launch interactive IPMI shell
    exec          Run list of commands from file
    set           Set runtime variable for shell and exec
    hpm           Update HPM components using PICMG HPM.1 file
    ekanalyzer    run FRU-Ekeying analyzer using FRU files
    
    
    管理信息级别
    linux-xen01:~ # ipmitool channel
    Channel Commands: authcap   <channel number> <max privilege>
                      getaccess <channel number> [user id]
                      setaccess <channel number> <user id> [callin=on|off] [ipmi=on|off] [link=on|off] [privilege=level]
                      info      [channel number]
                      getciphers <ipmi | sol> [channel]
    
    Possible privilege levels are:
       1   Callback level
       2   User level
       3   Operator level
       4   Administrator level
       5   OEM Proprietary level
      15   No access
      
    新增用户
    linux-xen01:~ # ipmitool user set name 10 dcloud
    linux-xen01:~ # ipmitool user set password 10 dcloud
    linux-xen01:~ # ipmitool user enable 10
    linux-xen01:~ # ipmitool user priv 10 4 1
    
    linux-xen01:~ # ipmitool user list 1
    ID  Name	     Callin  Link Auth	IPMI Msg   Channel Priv Limit
    2   root             true    true       true       ADMINISTRATOR
    10  dcloud           true    false      true       ADMINISTRATOR
    
    设置IP
    ipmitool lan set 1 ipaddr 192.168.70.222
    设置网关
    ipmitool lan set 1 defgw ipaddr 192.168.70.254
    arp -s 192.168.0.10 78:2b:cb:65:75:31
    
    开启lan 1 可访问
    ipmitool lan set 1 access on
    
    如果远程访问可以,但不能使用本地的地址因为-H hostname    Remote host name for LAN interface,
    也是说执行命令时,他能检测IP是否为远程地址,如果不是远程地址,则执行失败,如果是本地地址则直接执行即可
    
    远程地址
    linux-xen01:~ # ipmitool -I lan -H 192.168.70.224 -U root -P 123456 chassis power status
    Chassis Power is on
    linux-xen01:~ # ipmitool -I lan -H 192.168.70.222 -U root -P 123456 chassis power status
    Error: Unable to establish LAN session
    Unable to get Chassis Power Status
    linux-xen01:~ # 
    
    本机
    linux-xen01:~ # ipmitool chassis power status
    Chassis Power is on
    linux-xen01:~ # 
    
    检查是否安装IPMI
    linux-datastore:~ # lsmod |grep ipmi
    linux-datastore:~ # /etc/init.d/ipmi start
    Starting ipmi drivers:                                                                      done
    linux-datastore:~ # 
    linux-datastore:~ # lsmod |grep ipmi
    ipmi_devintf           17509  0 
    ipmi_si                53294  0 
    ipmi_msghandler        49895  2 ipmi_devintf,ipmi_si
    linux-datastore:~ # lsmod |grep ipmi|wc -l
    3
    
    配置IP和网关
    ipmitool lan set 1 ipaddr 192.168.60.222		设置IP
    ipmitool lan set 1 defgw ipaddr 192.168.60.254	设置网关
    
    linux-xen01:~ # ipmitool lan set
    usage: lan set <channel> <command> <parameter>
    LAN set command/parameter options:
      ipaddr <x.x.x.x>               Set channel IP address
      netmask <x.x.x.x>              Set channel IP netmask
      macaddr <x:x:x:x:x:x>          Set channel MAC address
      defgw ipaddr <x.x.x.x>         Set default gateway IP address
      defgw macaddr <x:x:x:x:x:x>    Set default gateway MAC address
      bakgw ipaddr <x.x.x.x>         Set backup gateway IP address
      bakgw macaddr <x:x:x:x:x:x>    Set backup gateway MAC address
      password <password>            Set session password for this channel
      snmp <community string>        Set SNMP public community string
      user                           Enable default user for this channel
      access <on|off>                Enable or disable access to this channel
      alert <on|off>                 Enable or disable PEF alerting for this channel
      arp respond <on|off>           Enable or disable BMC ARP responding
      arp generate <on|off>          Enable or disable BMC gratuitous ARP generation
      arp interval <seconds>         Set gratuitous ARP generation interval
      vlan id <off|<id>>             Disable or enable VLAN and set ID (1-4094)
      vlan priority <priority>       Set vlan priority (0-7)
      auth <level> <type,..>         Set channel authentication types
        level  = CALLBACK, USER, OPERATOR, ADMIN
        type   = NONE, MD2, MD5, PASSWORD, OEM
      ipsrc <source>                 Set IP Address source
        none   = unspecified source
        static = address manually configured to be static
        dhcp   = address obtained by BMC running DHCP
        bios   = address loaded by BIOS or system software
      cipher_privs XXXXXXXXXXXXXXX   Set RMCP+ cipher suite privilege levels
        X = Cipher Suite Unused
        c = CALLBACK
        u = USER
        o = OPERATOR
        a = ADMIN
        O = OEM
    

      

    转载于:https://www.cnblogs.com/heidsoft/p/4279974.html

    展开全文
  • ipmi消息ipmi消息ipmi消息ipmi消息ipmi消息
  • IPMI安装包

    2017-06-06 00:09:32
    IPMI安装文件
  • IPMI V1.5&IPMI V2.0

    2021-05-22 03:00:38
    IPMI规范V1.5和V2.0,全英文原版 IPMI规范V1.5和V2.0,全英文原版 IPMI规范V1.5和V2.0,全英文原版 IPMI规范V1.5和V2.0,全英文原版
  • ipmi IPMI工具的便捷脚本。 用法 将所有文件放入C:\Users\<your>\ 。 请不要为其创建任何文件夹。 说,如果您的名字是lxvs ,则ipmi.bat应该位于C:\Users\lxvs\ipmi.bat 。 按Win + R ,开始Run 。 输入cmd 。 ...
  • ipmi overview

    2017-04-24 22:04:18
    详细介绍了IPMI 技术 ,老外写的很不错。
  • IPMIView.zip

    2021-01-18 11:22:39
    IPMI工具
  • Linux IPMI

    2014-09-09 17:06:35
    Linux IPMI安装配置手册,
  • FREE IPMI简介

    2019-01-22 17:40:00
    简单介绍IPMI和FREE IPMI的相关知识,从该文档可以了解到BMC是什么

空空如也

空空如也

1 2 3 4 5 ... 20
收藏数 8,188
精华内容 3,275
关键字:

ipmi