精华内容
下载资源
问答
  • Word 2010 找不到 Endnote选项

    千次阅读 2019-10-06 00:19:56
    Word 2010 找不到 Endnote选项 在我们使用Word的过程中,常常发现没有Endnote选项。然后去百度方法,在相应的文件夹C:\Program Files (x86)\EndNote X9\Product-Support\CWYW找不到 Endnote Cwyw.dll 和 Endnote ...

    Word 2010 找不到 Endnote选项汇总(不是Office有效加载项)

    因为基本百度上的问题我全都遇到了…

    说明:在我们使用Word的过程中,常常发现没有Endnote选项。然后去找百度方法:

    1.通过Word中加载项添加。

    打开 Word—>文件—>选项—>加载项—>转到—>里面有个EndNote Cite While You Write 勾选即可。
    图片源于网络
    若加载项中没有EndNote Cite While You Write,则进行第二步。


    2.通过Word中加载项添加。

    别急着把刚刚Word加载项那个页面关掉。首先,你需要知道EndNote的文件位置。如我的EndNote位置是C:\Program Files (x86)\EndNote X9\Product-Support\CWYW中找到 Endnote Cwyw.dll 和 Endnote Cwyw.dot。然后再刚才那个页面(及上面那个图片)的添加,找到Endnote Cwcy.dll 加载即可。

    若CWYW中没有 Endnote Cwyw.dll 和 Endnote Cwyw.dot,则进行第三步。


    3.1寻找Endnote Cwcy.dll。

    当我们发现在EndNote X9\Product-Support\CWYW下没有Endnote Cwyw.dll 和 Endnote Cwyw.dot后,就无法进行加载。这时,一般都会有两个文件,CwcyX64.dat 和 CwcyX86.dat 两个文件。
    这时,修改这两个文件中其中一个的格式即可。(将dat改成rar格式)
    在这里插入图片描述
    最后解压就可以发现,找到 Endnote Cwyw.dll文件了。在执行第一步骤即可。
    注意!要根据自己是32位的还是64位的进行解压,如果在Word中的COW加载项出现无法加载的情况 “不是有效的加载项”更换另一个文件的EndNote Cwyw.dll 文件覆盖即可

    3.2 Endnote Cwyw.dll不是有效的office加载项。

    标记为3.2是因为有些情况是本身就有EndNote Cwyw.dll但是直接出现这种情况。一般就是以前注册过32位的dll。可能是以前下过的版本,也可能是不小心注册了32位的。

    3.2.1如果自己电脑是64位的,并且一开始没有 Endnote Cwyw.dll文件,是在Cwyw X64.dat中解压的,那么更换另一个Cwyw X86.dat解压即可。可能还需要再完成下面的步骤。
    3.2.2进行注册。打开命令提示符 运行 cmd ,在命令行输入

    regsvr32.exe “C:\Program Files (x86)\EndNote X9\Product-Support\CWYW\EndNote Cwyw.dll”

    这里面的 “X:\XXXX\EndNote X9\Product-Support\CWYW\EndNote Cwyw.dll” X代表自己的路径,根据自己的情况而定。最后会提示注册成功。然后重新启动即可。
    在这里插入图片描述

    这个问题我弄了几个小时,因为基本各种情况全部都遭遇到我的头上,但我有没有系统的找到一个资料说明这个情况,所以在这里总结一下,希望大家都能够解决问题。如果有什么疑问,可以留言,我尽量早点回复。第一次发文章,有什么不好之处见谅!

    展开全文
  • reagentc /info 操作失败3 系统找不到指定路径 本文运行环境为UEFI+GPT+Winx64(BIOS+MBR+Winx64同理)。UEFI+MBR条件下由于早期win7自身识别bcd所在分区代码缺陷,需要手动编辑bcd来添加该功能。

    本文运行环境为UEFI+GPT+Winx64(BIOS+MBR+Winx64同理)。UEFI+MBR条件下由于早期win7自身识别bcd所在分区代码缺陷,需要手动编辑bcd来添加该功能。

    Problem:

    The Windows Recovery Environment (WinRE) for Windows 7 or Windows 8 does not function correctly. The system is unable to boot into WinRE.

    Additionally, the TBWinRE script is unable to modify WinRE on the system and may be unable to create the TBWinRE boot media.

    Cause:

    There are a number of reasons WinRE is unable to function, including:

    • WinRE is disabled.
    • The BCD file is not configured correctly to boot WinRE.
    • The winre.wim file is missing or not at the expected location.
    • The WinRE configuration file is missing or contains invalid information.

    Solution:

    Use the following methods to attempt a repair of WinRE. You may wish to read through all the methods before beginning as some may not be applicable to your situation or you may need to try them in a different order.

    Note: Repairing WinRE will require using an Administrator Command Prompt. Reference the instructions below as necessary.

    If using Windows 7: Click on the Start button, then All Programs, then Accessories(alternatively, press the Windows Key and type Command Prompt). Right-click on theCommand Prompt item and select Run as administrator from the pop-up menu. If a UAC prompt is displayed, click the Yes button.

    If using Windows 8: Press the Windows Key to display the Start screen and then typeCommand Prompt. The program should show in the search results. Right-click on theCommand Prompt item and click Run as administrator. If a UAC prompt is displayed, click the Yes button.

    Unable to Build TBWinRE Boot Media

    If WinRE is broken, but you have the correct Winre.wim file for the system and you only want to build the TBWinRE boot media, it's not necessary to repair WinRE. Instead, you can just copy the Winre.wim file into the WinRE_Backup folder of the TBWinRE folder (e.g.D:\TBWinRE\WinRE_Backup). Be sure to use a version of the Winre.wim file that's compatible with your version of Windows.

    Disable & Enable WinRE

    Sometimes all that's needed is to disable WinRE prior to enabling. Run the following commands from an Administrator Command Prompt:
    reagentc /disable
    reagentc /enable

    Note: It's possible for the disable to report an error and still have enable succeed.

    Correct Invalid BCD File WinRE Reference

    Verify the BCD entries for WinRE are correct.

    Note: Successfully enabling WinRE using reagentc should automatically fix the BCD entries. However, this method is helpful when just the recoverysequence item's value is incorrect. Performing an automated boot repair using the Windows Startup Repair program can sometimes cause this type of problem.

    1. Open an Administrator Command Prompt.

    2. Run the following command to display the BCD entries:
      bcdedit /enum all

    3. Scroll through the entries and find the one for the currently booted Windows system. It will be a Windows Boot Loader entry with the identifier set to {current}. For example:

      Windows Boot Loader
      -------------------
      identifier         {current}
      device             partition=C:
      path               \Windows\system32\winload.exe
      description        Windows 7
      locale             en-US
      inherit            {bootloadersettings}
      recoverysequence   {d1758ad0-da09-11de-87b2-fe21320b6b8c}
      recoveryenabled    Yes
      osdevice           partition=C:
      systemroot         \Windows
      resumeobject       {d1758ace-da09-11de-87b2-fe21320b6b8c}
      nx                 OptIn


    4. Note the GUID value for the recoverysequence item. In this example, the GUID is {d1758ad0-da09-11de-87b2-fe21320b6b8c}.

    5. Next, look through the entries for a Windows Boot Loader entry with an identifier that's set to the GUID value. The description should be Windows Recovery Environment. An example is shown below. Note that several lines will wrap in the output (e.g. device and osdevice) and several additional lines are wrapped by this article's formatting.

      Windows Boot Loader
      -------------------
      identifier         {d1758ad0-da09-11de-87b2-fe21320b6b8c}
      device             ramdisk=[C:]\Recovery\d1758ad0-da09-
      11de-87b2-fe21320b6b
      8c\Winre.wim,{d1758ad1-da09-11de-87b2-fe21320b6b8c}
      path               \windows\system32\winload.exe

      description        Windows Recovery Environment
      inherit            {bootloadersettings}
      osdevice           ramdisk=[C:]\Recovery\d1758ad0-da09-
      11de-87b2-fe21320b6b
      8c\Winre.wim,{d1758ad1-da09-11de-87b2-fe21320b6b8c}
      systemroot         \windows
      nx                 OptIn
      winpe              Yes


      If not found, look for another Windows Recovery Environment entry (will have a different GUID) with Winre.wim at the correct location (the device and osdevice items show the path for the Winre.wim file). The location can be a drive letter (as in the above example) or a volume reference (e.g. [\Device\HarddiskVolume3]). If the correct entry is found it can be linked to the Windows entry by running the following command (make sure to use the GUID of the found entry). Command should all be on one line.
      bcdedit /set {current} recoverysequence {d1758ad1-da09-
      11de-87b2-fe21320b6b8c}

    Note: If you have a multi-boot configuration using the Microsoft Boot Manager be aware that each Windows 7 and Window 8 boot entry will have its own Windows Recovery Environment entry.

    Place Winre.wim at the Correct Location

    Make sure the Winre.wim file exists in the expected path (e.g. on the existing Recovery partition) or in the C:\Windows\System32\Recovery folder. Note that both the folder and the file may be hidden (enable viewing of hidden/system files, if necessary). 

    You can determine if the original path is still being used by viewing the ReAgent.xml file and checking the path for the ImageLocation. The ReAgent.xml file is located in theC:\Windows\System32\Recovery folder and can be opened using Internet Explorer, Notepad, or WordPad. If using Notepad you will most likely want to enable word wrapping for easier viewing. Look for <ImageLocation path= and note the path value specified (e.g. <ImageLocation path="\Recovery\WindowsRE"). If the original Recovery partition is no longer available you can create the path on the Windows partition and copy the Winre.wim file into it. In this example, you would copy Winre.wim into the C:\Recovery\WindowsRE folder. Then try enabling WinRE by running the following commands from an Administrator Command Prompt:
    reagentc /disable
    reagentc /enable

    Reset the ReAgent.xml File

    If none of the above methods worked you can try resetting sections of the ReAgent.xml file (make a backup copy of the file first, if you wish). This example will use WordPad to edit the file (using Notepad is not recommended since line breaks won't be displayed). Be aware that long lines will wrap -- do not add any new line breaks. Start an Administrator Command prompt and run the following command:
    write c:\windows\system32\reagent.xml

    Edit these sections to clear/reset the values: WinreBCDWinreLocationImageLocation,InstallStateWinREStaged. Leave other sections and settings unchanged. The example below is from an OEM Windows 8 installation (your file contents may be different). The indicated sections are shown with cleared/reset values.

    <?xml version='1.0' encoding='utf-8'?>
    <WindowsRE version="1.0">

      <WinreBCD id="{00000000-0000-0000-0000-000000000000}"/>
      <WinreLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}"/>
      <ImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}"/>

      <OsInstallLocation path="\OKRbackup\factory\" id="0" offset="728680628224" guid="{f0ea3b1a-8657-4f56-abd1-dfea687a2d2f}" index="1"/>
      <CustomImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}" index="0"/>

      <InstallState state="0"/>
      <OsInstallAvailable state="1"/>
      <CustomImageAvailable state="0"/>
      <IsAutoRepairOn state="0"/>

      <WinREStaged state="0"/>
      <OperationParam path=""/>
      <OsBuildVersion path="9200.16384.amd64fre.win8_rtm.120725-1247"/>
      <OemTool state="1"/>
      <BootKey state="0"/>
      <IsServer state="0"/>
      <ScheduledOperation state="4"/>
    </WindowsRE>


    Save the file and close WordPad.

    Make sure the Winre.wim file is in the C:\Windows\System32\Recovery folder. Then try enabling WinRE by running the following command:
    reagentc /enable

    Find & Restore the Winre.wim File

    If the Winre.wim file is missing on your system you can try one of the following methods to locate it:

    • Search the system for the file. From an Administrator Command Prompt, run the following command to search a drive for the Winre.wim file:
      dir /a /s c:\winre.wim

      The above will search the C: drive for the file, including sub-folders and hidden folders. Depending on the system there may be multiple copies of the file found or there may be none.

      Many systems are configured with WinRE on a separate partition that is not normally assigned a drive letter. In order to search these partitions you would need to use Disk Management to assign a drive letter (may not be possible, in all cases).

      Note: If you previously had or currently have a version of Rollback Rx installed, the Winre.wim file may have been renamed to Winre.dat. If that's the case, run the search for it instead and rename it when you copy it for WinRE (or TBWinRE) to use. For example:
      dir /a /s c:\winre.dat

    • If the system previously had a functioning WinRE and you have a backup image from that time you may be able to recover the file from your backup. For example, if you have a backup of the Windows 8 Recovery partition before it was deleted, use TBIView or TBIMount to access the backup and copy the Winre.wim file out. Keep in mind that it may be located in a hidden folder and the file itself may be hidden (these files/folders will show up normally in TBIView).

    • Locate the Winre.wim file on another system using the same version and architecture of Windows and copy it to the broken system. For example, if your desktop system running Windows 7 x64 is missing the file you could copy it from your laptop running Windows 7 x64.

    • Windows 7 only: If you have a standard Windows 7 installation DVD or USB flash drive you can mount the Install.wim file and copy out the Winre.wim file.

      • Create a new folder to use as the mount point. The folder must exist on an NTFS partition and it must be empty. In this example, E:\Win7-Install will be used.

      • Open an Administrator Command Prompt.

      • Mount the Install.wim file to the mount point. In this example, D: is the DVD drive. Command should all be on one line.
        dism /Mount-Wim /WimFile:"D:\sources\install.wim" 
        /index:2 /MountDir:"E:\Win7-Install" /readonly


        The mount may take several minutes to complete.

      • Browse to the E:\Win7-Install\Windows\System32\Recovery folder and copy out the Winre.wim file.

      • Unmount the Install.wim file. Command should all be on one line.
        dism /unmount-wim 
        /mountdir:"E:\Win7-Install" /discard

    Note: Regardless of the method used to find Winre.wim, you should make sure to use a version of the file compatible with the version and architecture of Windows for which WinRE is being repaired. For example, if you are repairing WinRE on a Windows 8 64-bit system you should use the Windows 8 64-bit Winre.wim file.

    展开全文
  • 报错 :java.io.FileNotFoundException: (系统找不到指定的路径。) java.io.FileNotFoundException: E:\code\operem_demo\src\main\resources\static\upload\zip\841195824A88E198C82A9ABB8023522D.zip (系统找不到...

    报错 :java.io.FileNotFoundException: (系统找不到指定的路径。)

    java.io.FileNotFoundException: E:\code\operem_demo\src\main\resources\static\upload\zip\841195824A88E198C82A9ABB8023522D.zip (系统找不到指定的路径。)
        at java.io.FileOutputStream.open0(Native Method)
        at java.io.FileOutputStream.open(FileOutputStream.java:270)
        at java.io.FileOutputStream.<init>(FileOutputStream.java:213)
        at java.io.FileOutputStream.<init>(FileOutputStream.java:162)

    错误分析 路径不存在,所以报错

    解决方法 : 检查路径,文件是否存在,如果不存在是否创建。

    转载于:https://www.cnblogs.com/lick468/p/10798011.html

    展开全文
  • Exception in thread "main" java.io.FileNotFoundException: a.txt (系统找不到指定的文件。) at java.io.FileInputStream.open(Native Method) at java.io.FileInputStream.(Unknown Source) at java.io....
  • 一开始以为是路径写错了(其实不是),借此,总结两种路径写法如下: import os os.rename("D:/demo/a.txt","D:/demo/b.txt") print("重命名完毕") (对了,我的pycharm上路径用 \\ 斜杠无法识别,要用 / ) import...

    python使用os.rename出现如题报错,在查阅了很多资料后,终于发现了问题。。。

    一开始以为是路径写错了(其实不是),借此,总结两种路径写法如下:

    import os
    os.rename("D:/demo/a.txt","D:/demo/b.txt")
    print("重命名完毕")
    

    (对了,我的pycharm上路径用 \\ 斜杠无法识别,要用 / )

    import os
    filename = 'helloword'
    os.chdir('E:/pycharm2019/loop/')
    os.rename('a.csv','b.csv')
    print("重命名完毕")
    

    其实问题是!我的重命名名字里含有斜杠 / 被识别为路径了!!!气气

    展开全文
  • 在安装了正版的mathtype 6.9b之后打开word,竟然报了个mathpage.wll找不到的错,于是乎逛了各大网站、博客,一遍遍的试,不知道诸位是不是也和我一样,屡次操作均是失败。 但我的一次自行尝试竟然解决了这个问题,...
  • springboot整合freemarker之后,本地跑起来完全没问题,但是打包部署后,报错路径找不到。 HashMap root =new HashMap(); root.put("vo", coverntToVO(policyFailDO)); Configuration config = new Configuration...
  • 报错信息:系统找不到指定的路径

    千次阅读 2017-09-10 03:49:22
    (系统找不到指定的路径。) 错误原因:repository 库需要管理员权限才能操作。 解决方案: 在 repository 文件夹上右键 -- 属性 -- 安全 -- 编辑 --everyone-- 将所有权限打钩。 ...
  • python读取word路径出错

    千次阅读 2019-10-09 11:27:23
    python读取doc文档方便,所以上文链接中把doc文件转存成docx,但是我在使用这个代码时,路径一直出错还会报一些奇怪的错误 pywintypes.com_error: (-2147023174, 'rpc 服务器可用。', none, none) 查询得知...
  • word2007转化成PDF时中使图片路径不显示出来 word生成pdf经常会遇到这样的问题:鼠标移动PDF中的图片上时总是显示图片路径。   最后我发现如下操作就可以去掉pdf中的图片路径(word2007为例): ...
  • 在安装好了的gensim,numpy,scipy三个包之后使用from gensim.models import word2vec或者import gensim会提示DLL load failed: 找不到指定的模块。 二、思考: 明明已经安装好了这三个包仍然报错。这个时候可以...
  • 结果在安装了mathtype6.9b之后,打开word发现选项里没有mathtype,就按照网上的教程打开word选项,打开加载项操作一通,这一部分网上教程很多,我就赘述了。然后添加完之后mathtype选项出现了,但是报错,错误如下...
  • 但是word组件 一直找不到,网上了很多方法,试用,就是解决不了问题; 后来在不断的尝试尝试之后, 忽然发现word组件可能是 不是以word名称形式存在与组件服务中,而是以编号的形式, 果然了一下就找到word...
  • MathType 6.9简体中文版是一款功能很强大的数学公式编辑器,但是因为不明原因,有时会出现找不到MathType.dll或者MathPage.wll文件找不到的错误窗口提示,而导致软件无法正常使用,本文将教您解决MathPage.wll或...
  • 一、问题 在使用FileInputStream或FileOutputStream时会...java.io.FileNotFoundException: .\xxx\xxx.txt (系统找不到指定的路径。) at java.io.FileOutputStream.open(Native Method) at java.io.FileOutputS...
  • 写在前面我遇到的问题:我是win10系统,下载安装了EndNote X9,并新建了数据库保存了E盘,因为EndNote在word2019里显示,我就卸载了重装。重装打开Endnote就出现问题:E:\EndNoteX9\数据库.enl contain incorret...
  • Word 2010插入超链接——使用相对路径
  • matlab找不到编译器的问题

    千次下载 热门讨论 2012-10-06 22:33:46
    因为vs2012在安装时,windows sdk的mt.exe位置变了,而matlab还是按照老的路径找,肯定找不到(原来在windows sdks下面,现在在windows kits下面). 如果你的环境是64位windows,并且vs2012装在默认目录下,matlab是64位版本...
  • 系统之中找不到OpenCV相关的配置项。 解决方案 1、设置环境变量。 找到该文件所在位置,一般为你OpenCV安装路径的bin文件夹下面,例如: ……\opencv300\opencv\build\x64\vc12\bin 将该路径添加到环境变量中...
  • 读取Excel 数据并写入到Word示例

    千次阅读 2019-10-14 19:44:05
    一个读取Excel 数据并写入到Word 的项目
  • 上次写了一篇删除Office(Word,Excel,PowerPoint)中Recent Document最近文档地址存在的文件,注重从注册表中删除记录,后来发现有问题,online打开文件的记录在注册表中并没有找到(知道注册表中有没有,个人...
  • 1.头文件找不到 基本不用改多少东西 找不到头文件是因为c_cpp_properties.json中includepash你没有修改为你安装的mingw或者其他编译器的头文件和库的位置 2.大多编译失败都是gcc、gdb、g++没有加入环境变量(或者在...
  • WORD文件转换成HTML文件的路径问题

    千次阅读 2015-10-13 16:43:26
    在要实现这个功能时,我从网上搜索了几乎所有的方案,可以都成功,的 function word2html($wfilepath){ $word=new COM("Word.Application") or die("无法打开 MS Word"); $word->visible = 1 ; $word->...
  • MathType 6.9简体中文版是一款功能很强大的数学公式编辑器,但是因为不明原因,有时会出现找不到MathType.dll或者MathPage.wll文件找不到的错误窗口提示,而导致MathType软件无法正常使用,本文将教您解决MathPage.wll...
  • luacom打开中文路径Word文件

    千次阅读 2012-01-15 22:21:20
     luacom是一个非常强大的模块,它使我们可以应用各种com组件,比如Word,但是,有一个问题,中文文件名它识别。为什么呢?因为com内部是unicode的,于是luacom要求所有输入都是utf-8的,而且luacom的输出也是utf-...
  • Zotero手动配置到Word

    千次阅读 2020-04-07 23:19:54
    Zotero安装可能正好word打开着,...根据自己安装的目录一般是C:\Program Files (x86)\Zotero(如装在别的盘,去别的盘相应的安装路径),找到Zotero.dotm文件,如下如所示。建议把两个文件都复制,不要剪切!!...
  • opencv找不到dll的问题

    2017-12-06 10:16:19
    如上图所示,运行程序时提示找不到opencv_highgui331.dll(后面还跟着找不到一大堆opencv的dll)。可问题是我已经把opencv的动态链接库文件添加到系统路径中了啊,![图片说明]...
  • 我在WinCE4.0下定制了一个ARMV4Rel内核,我选择的开发包是 Win32[WCE ARMV4I],但是倒到CE开发板中的时候,helloword.exe文件都不可用,并出现如下错误: 找不到 "helloword"(或它的某一个组件).请确认路径和文件名...
  • MathType 6.9简体中文版是一款功能很强大的数学公式编辑器,但是因为不明原因,有时会出现找不到MathType.dll或者MathPage.wll文件找不到的错误窗口提示,而导致软件无法正常使用,本文将教您解决MathPage.wll或...

空空如也

空空如也

1 2 3 4 5 ... 20
收藏数 151,442
精华内容 60,576
热门标签
关键字:

word找不到路径