精华内容
下载资源
问答
  • “NI_NUMERICHOST” is not exported by the Socket module “getaddrinfo” is not exported by the Socket module “getnameinfo” is not exported by the Socket module Can’t continue after import er

    MHA masterha_check_ssh 报错

    masterha_check_ssh --conf=/etc/mha/mha.conf

    “NI_NUMERICHOST” is not exported by the Socket module
    “getaddrinfo” is not exported by the Socket module
    “getnameinfo” is not exported by the Socket module
    Can’t continue after import errors at /usr/local/share/perl5/MHAdeUtil.pm line 29
    BEGIN failed–compilation aborted at /usr/local/share/perl5/MHAdeUtil.pm line 29.
    Compilation failed in require at /usr/local/share/perl5/MHA/SlaveUtil.pm line 27.
    BEGIN failed–compilation aborted at /usr/local/share/perl5/MHA/SlaveUtil.pm line 27.
    Compilation failed in require at /usr/local/share/perl5/MHA/DBHelper.pm line 26.
    BEGIN failed–compilation aborted at /usr/local/share/perl5/MHA/DBHelper.pm line 26.
    Compilation failed in require at /usr/local/share/perl5/MHA/HealthCheck.pm line 30.
    BEGIN failed–compilation aborted at /usr/local/share/perl5/MHA/HealthCheck.pm line 30.
    Compilation failed in require at /usr/local/share/perl5/MHA/Server.pm line 28.
    BEGIN failed–compilation aborted at /usr/local/share/perl5/MHA/Server.pm line 28.
    Compilation failed in require at /usr/local/share/perl5/MHA/Config.pm line 29.
    BEGIN failed–compilation aborted at /usr/local/share/perl5/MHA/Config.pm line 29.
    Compilation failed in require at /usr/local/share/perl5/MHA/SSHCheck.pm line 32.
    BEGIN failed–compilation aborted at /usr/local/share/perl5/MHA/SSHCheck.pm line 32.
    Compilation failed in require at /usr/local/bin/masterha_check_ssh line 25.
    BEGIN failed–compilation aborted at /usr/local/bin/masterha_check_ssh line 25

    解决方法

    cpan[1]> install ExtUtils::Constant
    cpan[1]> install Socket

    如果没有cpan软件,执行一下命令

    yum install -y cpan perl-CPAN*

    之后在执行就没问题了。



    本文参考:
    https://my.oschina.net/gibsonxue/blog/1575939/print

    展开全文
  • [name] is not exported by [module]" Occasionally you will see an error message like this: 'foo' is not exported by bar.js (imported by baz.js) Import declarations must have correspo...

    官方解释

    Error: "[name] is not exported by [module]"

    Occasionally you will see an error message like this:

    'foo' is not exported by bar.js (imported by baz.js)

    Import declarations must have corresponding export declarations in the imported module. For example, if you have import a from './a.js' in a module, and a.js doesn't have an export default declaration, or import {foo} from './b.js', and b.js doesn't export foo, Rollup cannot bundle the code.

    This error frequently occurs with CommonJS modules converted by rollup-plugin-commonjs, which makes a reasonable attempt to generate named exports from the CommonJS code but won't always succeed, because the freewheeling nature of CommonJS is at odds with the rigorous approach we benefit from in JavaScript modules. It can be solved by using the namedExports option, which allows you to manually fill in the information gaps.

    由于commonjs的某些特性,你必须显式指出某个文件的变量导出。

    例如:

    (我的一个react项目)

    import resolve from 'rollup-plugin-node-resolve'
    import commonjs from 'rollup-plugin-commonjs'
    import json from 'rollup-plugin-json'
    
    export default {
      input: './lib/main.js',
      output: {
        file: 'build/bundle.min.js',
        format: 'iife',
        name: 'saber2pr',
        banner: `var process = {
          env: {
            NODE_ENV: 'production'
          }
        }`
      },
      watch: {
        include: 'lib/**'
      },
      plugins: [resolve(), commonjs({
        'namedExports': {
          './lib/main.js': ['__moduleExports']
        }
      }), json()]
    }

     

    其中commonjs插件配置了选项,指明./lib/main.js文件的导出变量__moduleExports。

    namedExports配置项的格式:

    Options.namedExports?: {
        // 文件路径:[导出变量名]
        [key: string]: string[];
    }
    
    // 即键是文件路径,值是导出变量数组(字符串数组)。

     

    然后重新运行rollup -c。

     

    展开全文
  • 前面发布过一个Trial Balance - only can be exported month by month 单指某一个账套不好用的情况,当时的方法是更新data等. 最近又不好了.修改如下

    前面发布过一个Trial Balance - only can be exported month by month 单指某一个账套不好用的情况,当时的方法是更新data等.

    最近又不好了.修改如下

    展开全文
  • Simple Hooking of Functions not Exported by Ntoskrnl.exe By: gareth As many of you will know, hooking functions not exported by ntoskrnl.exe is a real pain, as you need to hard code their position
    Simple Hooking of Functions not Exported by Ntoskrnl.exe
    
      By: gareth

     

    As many of you will know, hooking functions not exported by ntoskrnl.exe is a real pain, as you need to hard code their position in KeServiceDescriptorTable, and this will change between windows releases.

    Hardcoding the positions seems a poor solution, since it means after a new service pack, the rootkit may no longer work and become discovered.

    As I have found the code on this site extremely helpful, I think it is only fair that I return the favour ;-)

    I have implemented the method described in previous posts, whereby I have mapped a view of ntdll.dll into the process space of whoever loads the driver initially, and then retrieve the required function positions directly from the dll.

    This was relatively simple to do, and only requires knowledge of the pe file format, and a few undocumented apis.

    Using the function pasted below, when hooking you simply do as follows:


    RtlInitUnicodeString(&dllName, L"//Device//HarddiskVolume1//Windows//System32//ntdll.dll");
    functionAddress = GetDllFunctionAddress(functionName, &dllName);
    position = *((WORD*)(functionAddress+1));
        
    g_OriginalZwCreateProcessEx = (ZWCREATEPROCESSEX)(KeServiceDescriptorTable.ServiceTableBase[position]);


    and here's the function GetDllFunctionAddress:


    DWORD GetDllFunctionAddress(char* lpFunctionName, PUNICODE_STRING pDllName)
    {
        HANDLE hThread, hSection, hFile, hMod;
        SECTION_IMAGE_INFORMATION sii;
        IMAGE_DOS_HEADER* dosheader;
        IMAGE_OPTIONAL_HEADER* opthdr;
        IMAGE_EXPORT_DIRECTORY* pExportTable;
        DWORD* arrayOfFunctionAddresses;
        DWORD* arrayOfFunctionNames;
        WORD* arrayOfFunctionOrdinals;
        DWORD functionOrdinal;
        DWORD Base, x, functionAddress;
        char* functionName;
        STRING ntFunctionName, ntFunctionNameSearch;
        PVOID BaseAddress = NULL;
        SIZE_T size=0;

        OBJECT_ATTRIBUTES oa = {sizeof oa, 0, pDllName, OBJ_CASE_INSENSITIVE};

        IO_STATUS_BLOCK iosb;

        //_asm int 3;
        ZwOpenFile(&hFile, FILE_EXECUTE | SYNCHRONIZE, &oa, &iosb, FILE_SHARE_READ, FILE_SYNCHRONOUS_IO_NONALERT);

        oa.ObjectName = 0;

        ZwCreateSection(&hSection, SECTION_ALL_ACCESS, &oa, 0,PAGE_EXECUTE, SEC_IMAGE, hFile);
        
        ZwMapViewOfSection(hSection, NtCurrentProcess(), &BaseAddress, 0, 1000, 0, &size, (SECTION_INHERIT)1, MEM_TOP_DOWN, PAGE_READWRITE);
        
        ZwClose(hFile);
        
        hMod = BaseAddress;
        
        dosheader = (IMAGE_DOS_HEADER *)hMod;
        
        opthdr =(IMAGE_OPTIONAL_HEADER *) ((BYTE*)hMod+dosheader->e_lfanew+24);

        pExportTable =(IMAGE_EXPORT_DIRECTORY*)((BYTE*) hMod + opthdr->DataDirectory[ IMAGE_DIRECTORY_ENTRY_EXPORT]. VirtualAddress);

        // now we can get the exported functions, but note we convert from RVA to address
        arrayOfFunctionAddresses = (DWORD*)( (BYTE*)hMod + pExportTable->AddressOfFunctions);

        arrayOfFunctionNames = (DWORD*)( (BYTE*)hMod + pExportTable->AddressOfNames);

        arrayOfFunctionOrdinals = (WORD*)( (BYTE*)hMod + pExportTable->AddressOfNameOrdinals);

        Base = pExportTable->Base;

        RtlInitString(&ntFunctionNameSearch, lpFunctionName);

        for(x = 0; x < pExportTable->NumberOfFunctions; x++)
        {
            functionName = (char*)( (BYTE*)hMod + arrayOfFunctionNames[x]);

            RtlInitString(&ntFunctionName, functionName);

            functionOrdinal = arrayOfFunctionOrdinals[x] + Base - 1; // always need to add base, -1 as array counts from 0
            // this is the funny bit.  you would expect the function pointer to simply be arrayOfFunctionAddresses[x]...
            // oh no... thats too simple.  it is actually arrayOfFunctionAddresses[functionOrdinal]!!
            functionAddress = (DWORD)( (BYTE*)hMod + arrayOfFunctionAddresses[functionOrdinal]);
            if (RtlCompareString(&ntFunctionName, &ntFunctionNameSearch, TRUE) == 0)
            {
                ZwClose(hSection);
                return functionAddress;
            }
        }

        ZwClose(hSection);
        return 0;
    }


    Hopefully this will be useful to you.
    展开全文
  • IMP-00013: only a DBA can import a file exported by another DBA 错误解决方法 oracle导入数据报下面错误的解决办法。 IMP-00013: only a DBA can import a file exported by another DBA 给用户授予dba...
  • 今天遇到导入dmp文件,报 IMP-00013: only a DBA can import a file exported by another DBA 的问题,解决方案 给导入用户赋予dba 权限  sqlplus / as sysdba grant sysdba to user; grant imp_full_database ...
  • 问题:idea使用maven构建OSGI项目时,引用其他项目时会报the packge “xxxxxx” is not exported by the bundle dependecies,然后就无法install工程。 解决办法: 打开 File – settings – inspection – OSGI – ...
  • [root@Server3 ~]# masterha_check_repl --conf=/etc/masterha/app1.cnf ..."NI_NUMERICHOST" is not exported by the Socket module "getaddrinfo" is not exported by the Socket module "getnameinfo" is not e...
  • the objects were exported by RTCRM, not by you ,指的是即将导入的数据属于 ABC 用户,但导入时使用的是 XYZ用户,因此需要对于这种导入导出用户名不同的情况,可以明确指定用户名称 ,执行: imp xyz /xxx...
  • IMP-00013: only a DBA can import a file exported by another DBA 提示导入的用户要有DBA权限; 授权再导入 [oracle@oracle04 ~]$sqlplus / as sysdba SQL*Plus: Release 12.2.0.1.0 Production on Mon Nov 2 ...
  • Error: object ‘markvario’ is not exported by ‘namespace:spatstat’ ERROR: lazy loading failed for package ‘Seurat’ 解决方法: remove.packages(grep(“spatstat”, installed.packages(), value = T)) ...
  • 来自: https://ourcodeworld.com/articles/read/182/the-canvas-has-been-tainted-by-cross-origin-data-and-tainted-canvases-may-not-be-exported These errors happens when you try to manipulate an image ...
  •  IMP-00013: only a DBA can Import a file Exported by another DBA  查询错误号知是因为新建的用户不具有导入由其他用户导出数据的权限,解决办法:  1,使用DBA用户导入,添加fromuser和touser参数;  2,赋予
  • Foreign keys not exported

    2020-12-26 02:10:26
    are exported only by using: <p><code>ora2pg -p -t TABLE -o extra.sql -a 'TABLE[concrete names]' -b schema/tables -c config/ora2pg.conf</code></p> <p>i'm using Ora2Pg v20.0</p><p>该提问...
  • 之前正常运行的perl脚本换了一个环境突然报 ..."make_path" is not exported by the File::Path modul FILE::PATH question   转载于:https://www.cnblogs.com/huanghongbo/p/6264736.html
  • 今天遇到导入dmp文件,报 IMP-00013: only a DBA can import a file exported by another DBA 的问题,解决访问有两种: 1.给导入用户赋予dba 权限 SQL>grant sysdba to user; SQL>grant imp_full_database to ...
  • 00013: only a DBA can import a file exported by another DBA IMP-00000: Import terminated unsuccessfully 问题原因 查询错误号IMP-00013是因为当前用户aud不具有导入由其他用户导出数据的权限,因为audit_log....
  • 今天开发人员说倒入一个schema的时候失败了,报了IMP-00013 : only a DBA can import a file exported by another DBA 错误,理所当然地想只要这个用户有dba权限就o...
  • 最近在安装github上的R语言程序包DiagrammeR时一直出现如下错误: library(devtools) ...Error : object 'cividis' is not exported by 'namespace:viridisLite' ERROR: lazy loading failed for...
  • 现象:最近在使用rollup开发小型js插件,打包的时候报错了Error: 'default' is not exported by node_modules/qs/lib/index.js。 原因:我使用了qs包来格式化,安装了qs依赖之后引入import qs from 'qs',但是打包...
  • 执行下面的挂载命令 [htc@localhost ~]$ sudo mount -t nfs 192.168.64.128:/root/Desktop/NFS_Server /home/htc/Desktop/myTest ...mount: 192.168.64.128:/root/Desktop/NFS_Server failed, reason given by serv
  • rollup 打包vue3组件库报错 ‘createElementVNode’ is not exported by node_modules\vue\dist\vue.runtime.esm.js 报错意思就是说 createElementVNode 没有被导出。也就是找不到。然后看下面 1: import { ...

空空如也

空空如也

1 2 3 4 5 ... 20
收藏数 21,751
精华内容 8,700
关键字:

byexported