精华内容
下载资源
问答
  • 交换机固件

    2014-05-12 16:06:06
    这里是交换机2326固件,好吧,如果你喜欢,你就下载
  • Quanta 交换机固件

    2020-11-22 17:31:39
    Quanta 交换机固件
  • 华为3300交换机固件

    2019-03-13 18:06:12
    华为S3300交换机固件损坏,不断重启,将此设备包下载后,传到设备上即可
  • Cisco 交换机固件

    2015-04-16 23:08:46
    3750g 三层可堆叠交换机固件 支持所有静态路由动态路由协议
  • 62xx系列交换机固件升级
  • 西门子之通过FTP修复SCALANCE X系列交换机固件pdf,西门子之通过FTP修复SCALANCE X系列交换机固件
  • H3C S3100V2交换机固件,系统。在交换机下载下来的,绝对可用。版本比较新!安装方法请自行百度
  • 行业分类-物理装置-一种交换机固件自动刷新方法.zip
  • 中兴 ZXR10 2818S 交换机 固件 内含TFTP32上传工具
  • 中兴2609/2818s/2826s交换机固件下载firmware ZXR10 28S Series V1.1.12.E ZXR10 Router Operating System Software, ZTE Corporation: ZXR10 Version Number : ZXR10 28S Series V1.1.12.E Copyright (c) 2001-...
  • 中兴2609/2818s/2826s交换机固件下载firmware ZXR10 28S Series V1.1.12.E 中兴 2609/2818s/2826s交换机固件firmware ZXR10 28S Series V1.1.12.E ZXR10 Router Operating System Software, ZTE Corporation: ZXR10...
  • 华为s5700交换机固件

    2016-08-17 17:12:07
    华为s5700交换机 S5700SI-V200R005C00SPC500.zip
  • 华三的交换机固件 到哪都要钱 麻烦 想办法找了一个 发个免费 大家一起学习 虽然老点 救急是足够了,我也用的是这个。。。。。
  • DPTECH设备固件,迪普产品使用必须升级固件,出厂固件各种问题,不怕麻烦可以不升
  • 本资源包含有华为S5700交换机最新系统固件、补丁和WEB,不包含升级方法,请自行查找升级方法
  • dell交换机固件

    2016-11-22 16:57:00
    Upgrading the S4048-ON Dell Networking OS Image using the Dell Networking OS CLI Bare Metal Provisioning NOTE: If you are using Bare Metal Provisioning (BMP), see the Bare Metal Provisioning topi...
    Upgrading the S4048-ON Dell Networking OS Image using the Dell Networking OS CLI
    Bare Metal Provisioning 
    
    NOTE: If you are using Bare Metal Provisioning (BMP), see the Bare Metal Provisioning topic in the Dell Networking OS Configuration Guide or the Open Automation Guide. 
    
    Manual Upgrade Procedure 
    
    Follow these steps carefully to upgrade your S4048-ON systems: 
    
    1 Dell Networking recommends that you back up your startup configuration and any important files and directories to an external media prior to upgrading the system. 
    
    2 Upgrade the Dell Networking OS in flash partition A: or B: 
    
    upgrade system [flash: | ftp: stack-unit <1-6> | tftp: | scp: | usbflash:] [A: | B:] EXEC Privilege
    Dell#upgrade system ftp: a: 
    
    Address or name of remote host []: 10.16.127.35 Source file name []: FTOS-SK-9.10.0.1.bin 
    
    User name to login remote host: ftpuser Password to login remote host: 
    
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!... 
    
    ........................................................ 
    
    ........................................................ 
    
    ........................................................ 
    
    ........................................................ 
    
    ........................................................ 
    
    ........................................................ 
    
    ........60413463 bytes successfully copied System image upgrade completed successfully. 
    
    Dell#Apr 12 04:42:52: %STKUNIT1-M:CP %DOWNLOAD-6-UPGRADE: Upgrade completed successfully 
    
    Dell# 
    
    3 Verify that the Dell Networking OS has been upgraded correctly in the upgraded flash partition show boot system stack-unit [1-6] | all] 
    
    
    EXEC Privilege 
    
    Dell#show boot system stack-unit all 
    
    Current system image information in the system: 
    
    =============================================== 
    
    Type Boot Type A B 
    
    --------------------------------------------------------------------------------------------- 
    
    - 
    
    stack-unit 1 FLASH BOOT 9.10(0.1) 9.10(0.0) [boot] 
    
    stack-unit 2 is not present. 
    
    stack-unit 3 is not present. stack-unit 4 is not present. stack-unit 5 is not present. stack-unit 6 is not present. Dell# 
    
    4 Change the Primary Boot Parameter of the S4048-ON to the upgraded partition A: or B: boot system stack-unit 1 primary system: [A: | B: | tftp: | ftp:] 
    
    
    CONFIGURATION 
    
    5 Save the configuration so that the configuration will be retained after a reload using write memory command. write [memory] 
    
    
    EXEC PRIVILEGE 
    
    Dell#write memory 
    
    ! 
    
    Apr 12 04:44:35: %STKUNIT1-M:CP %FILEMGR-5-FILESAVED: Copied running-config to startup- config in flash by default 
    
    Dell# 
    
    6 Reload the unit reload 
    
    
    EXEC PRIVILEGE 
    
    Command : reload 
    
    Mode : EXEC PRIVILEGE 
    
    Dell#reload 
    
    Proceed with reload [confirm yes/no]: y 
    
    Apr 12 04:44:42: %STKUNIT1-M:CP %CHMGR-5-RELOAD: User request to reload the chassis syncing disks... 
    
    done 
    
    7 Verify the S4048 ON has been upgraded to the Dell Networking OS version 9.10(0.1) show version 
    
    
    EXEC PRIVILEGE 
    
    Dell#show version 
    
    Dell Real Time Operating System Software Dell Operating System Version: 2.0 
    
    Dell Application Software Version: 9.10(0.1) 
    
    Copyright (c) 1999-2016 by Dell Inc. All Rights Reserved. Build Time: Sun Apr 10 06:42:55 2016 
    
    Build Path: /sites/eqx/work/swbuild01_1/build16/E9-10-0/SW/SRC Dell Networking OS uptime is 2 hour(s), 24 minute(s) 
    
    System image file is "system://A" System Type: S4048-ON 
    
    Control Processor: Intel Rangeley with 2 Gbytes (2127560704 bytes) of memory, core(s) 2. 
    
    8G bytes of boot flash memory. 
    
    1 54-port TE/FG (SK-ON) 
    
    48 Ten GigabitEthernet/IEEE 802.3 interface(s) 
    
    6 Forty GigabitEthernet/IEEE 802.3 interface(s) Dell#
    

    转载于:https://www.cnblogs.com/ligao/p/6090023.html

    展开全文
  • h3c s2652交换机固件bios

    2017-02-12 19:22:18
    h3c s2652的固件,s2652-cmw520-r1102_bak.bin s2652-cmw520-r1102.bin
  • S5320SI-V200R008SPH022.pat S5320-SI-V200R008C00SPC500.007.web S5300SI-V200R005C00SPC500 给有需要的朋友
  • 思科3750E系列交换机最新固件,含c3750e-universalk9-tar.150-2.SE10a.tar 和c3750e-universalk9-mz.150-2.SE10a.bin。
  • 华为S5700-10P-LI-V200R009C00SPC500固件,带补丁,带WEB补丁包
  • 下载固件,如image_tesla_hybrid_2.5.0.83_release_cisco_signed.bin 1.下载安装 binwalk brew install binwalk 2.下载安装lzop brew install loop 3.使用binwalk解开文件 binwalk -eM image_tesla_hybrid_...

    下载固件,如image_tesla_hybrid_2.5.0.83_release_cisco_signed.bin

    1.下载安装 binwalk

    brew install binwalk

    2.下载安装lzop

    brew install loop

    3.使用binwalk解开文件

    binwalk -eM   image_tesla_hybrid_2.5.0.83_release_cisco_signed.bin
    

    4._image_tesla_hybrid_2.5.0.83_release_cisco_signed.bin.extracted找你需要的分析文件,根据分缀进行进一步的解压,如cpio的文件,我们可以使用cpio来解压

    cat _image_tesla_hybrid_2.5.0.83_release_cisco_signed.bin.extracted/_E0DE0.extracted/_90B6E0.extracted/0.cpio | cpio -i
    

    5.然后你就可以得到一些js, elf的执行文件和so 和配置等等

    6.可以使用ida来分析或者其它的反汇编工具来分析,也有js和python 之类的文件,也可以看看 。

    展开全文
  • 适用已下型号华为交换机: S5700-28P-LI-AC/S5700-28P-PWR-LI-AC/S5700-52P-LI-AC/S5700-52P-PWR-LI-AC/S5700-28P-LI-DC/S5700-52P-LI-DC
  • 适用已下型号华为交换机:S5700S-28P-LI-AC/S5700S-52P-LI-AC
  • 适用已下型号华为交换机:S5700S-28X-LI-AC/S5700S-52X-LI-AC
  • 适用已下型号华为交换机: S5700-28X-LI-AC/S5700-28X-LI-DC/S5701-28X-LI-AC/S5700-28X-PWR-LI-AC/S5700-52X-LI-AC/S5700-52X-LI-DC/S5700-28X-LI-24S-AC/ S5700-28X-LI-24S-AC/S5701-28X-LI-24S-AC/S5700-52X-PWR-...
  • 求华为S5648p交换机固件,单位的华为S5648P交换机误删bootrom文件,现在情况是无限重启。邮箱:1106678356@qq.com,非常感谢!
  • 适用已下型号华为交换机:只能用于 S5700S-28P-PWR-LI-AC
  • 华为S2000TP-MI交换机的软件 BOOTROM 和 VRP310
  • [S5700S-P-LI]本软件仅用于S5700S-P-LI设备形态,包括S5700S-28P-LI-AC、S5700S-52P-LI-AC,This software only is used the S5700S-P-LI ├-[S5700S-P-LI-bootrom.bin] ├-[S5700S-P-LI-V200R008C00SPC500.cc]
  • S5700S-LI目前最新版,最多支持8个VlanIF.

空空如也

空空如也

1 2 3 4 5 ... 20
收藏数 3,484
精华内容 1,393
关键字:

交换机固件