精华内容
下载资源
问答
  • m trying to access a Virtual Serial Port for USB with <code>System.IO.Ports.SerialPort</code> and I get the error <code>The given port name (COM5) does not resolve to a valid serial</code> when I try ...
  • <div><p>Port over the following <code>Serial_</code> API's over from the AVR core to SAMD: - <code>readBreak - <code>baud - <code>stopbits - <code>paritytype - <code>numbits - <code>dtr - <code>...
  • the USB port into the serial port 2 (available on pins D16 and D17). Basically, the system has to work as per follow: <p>the Mega should be able to receive g-code commands from USB (like it's ...
  • <p>This is the error opening a /dev/ttyUSB7 port: <code>Hello World! Unhandled exception. System.IO.IOException: Broken pipe at System.IO.Ports.SerialStream.set_DtrEnable(Boolean value) at System.IO....
  • ve the same problem with AppImage as described before : There is no way to enter serial port and I need it for Doppler Correction with GPredict. <p>So I've tried to compile the software by ...
  • <div><p>With this version I have problems with reading to open /dev/ttyUSB0. Can not read data anymore.... PL2303 Serial Port</p><p>该提问来源于开源项目:Hexxeh/rpi-firmware</p></div>
  • ComPort for Android USB Serial 2.9.exe
  • <p>For now it requires <code>-DUSB_SERIAL</code> to be passed to <code>cmake, as USB CDC does use some buffers, but I think we could support it by default on the Horus targets, as memory is not an ...
  • I have a question that my program is running in nano server container and I need to access the hardware by using serial port and USB. Does iotedge support this? if it supports, how can i config my ...
  • Essentially, this speeds up USB based serial ports significantly - I have observed an improvement of up to <strong>10x</strong> (from ~70ms to ~7ms per command) compared to the previous ...
  • usb_serial_port driver

    2013-10-24 11:15:04
    USB转串口驱动(usb_serial_port driver) USB 2.0 TO RS232 Cable USB 2.0 TO RS232 Converter USB TO RS232 Cable USB TO RS232 Converter
  • usbserialport.zip

    2019-08-19 09:49:58
    这个驱动库在使用安卓的USB设备接口实现了对多种USB转串口模块的配置和连接。支持CH340、PL2303、CP2102等,均可配置波特率、数据位、停止位、校验位等。
  • Nokia MTK USB Serial Port Driver.rar 塞班手机usb串口驱动
  • TI CC2540 USB CDC Serial Port

    热门讨论 2014-06-01 11:45:36
    TI CC2540 USB CDC Serial Port
  • prolific usb-to-serial comm port 黑壳的USB converter 232 Win8-32位可用 驱动版本3.6.78.350
  • YaTTYD USB-Serial Port

    2013-01-05 12:19:02
    provides USB serial port converter detecting/auto-connecting, when the USB ;; device changing is detected, the CDC serial port can be opened automatically. ;; This utility can be a serial port server...
  • <p>Can read data from USB serial. <h2>Actual behavior <p>Working fine directly in console on RPi <pre><code>bash core-ssh:~# stty -F /dev/ttyUSB0 1200 sane evenp parenb cs7 -crtscts core-ssh:~# cat /...
  • <div><p>Is there any way to set multiple USBSerialPort for one board? <p>Our use case: we have boards that are exposing multiple consoles on the same uart port and we would like to be able to access ...
  • Prolific USB-to-Serial Comm Port
  • #define SERIAL_PORT SerialUSB ^ sketch\debug.cpp:102:9: note: in expansion of macro 'SERIAL_PORT' SERIAL_PORT.print("**TRACE"); ^ Multiple libraries were found for "Dhcp.h"...
  • Winsoft ComPort for Android USB Serial v3.1 for Delphi & C++ Builder XE6 - 10.3 FULL SOURCE  适用于Android的Delphi和C ++ Builder XE6 USB USB v3.1的Winsoft ComPort-10.3完整源代码  用于Android的...

      Winsoft ComPort for Android USB Serial v3.1 for Delphi & C++ Builder XE6 - 10.3 FULL SOURCE

      适用于Android的Delphi和C ++ Builder XE6 USB USB v3.1的Winsoft ComPort-10.3完整源代码

      用于Android的USB连接设备的Delphi和C ++ Builder串行通信库。

      使用UsbSerial库

      支持CP210x,CP2130,CDC,FTDI,PL2303和CH34x设备

      无需特殊的root访问权限

      可用于Delphi / C ++ Builder XE6-10.3

      注册版本中包含的源代码

      应用程序中的免版税分配

      Delphi and C++ Builder serial communication library for USB connected devices for Android.

      uses UsbSerial library

      supports CP210x, CP2130, CDC, FTDI, PL2303 and CH34x devices

      no special root access privileges needed

      available for Delphi/C++ Builder XE6 - 10.3

      source code included in registered version

      royalty free distribution in applications

    展开全文
  • Dtech驱动大全 usb转换串口 USB Serial Port 包涵DT-5001 DT-5002 DT-5003 DT-5010 DT-5011 DT-5018 DT-5019 DT-5031 DT-5051
  • SerialUSB.begin(115200); } // the loop routine runs over and over again forever: void loop() { SerialUSB.println(millis()); digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level) ...
  • Prolific USB-to-Serial Comm Port x86驱动 usb转串口线驱动 Windows 32位
  • Winsoft ComPort for Android USB Serial v3.1 for Delphi & C++ Builder XE6 - 10.3 FULL SOURCE  适用于Android的Delphi和C ++ Builder XE6 USB USB v3.1的Winsoft ComPort-10.3完整源代码  用于Android的...

      Winsoft ComPort for Android USB Serial v3.1 for Delphi & C++ Builder XE6 - 10.3 FULL SOURCE

      适用于Android的Delphi和C ++ Builder XE6 USB USB v3.1的Winsoft ComPort-10.3完整源代码

      用于Android的USB连接设备的Delphi和C ++ Builder串行通信库。

      使用UsbSerial库

      支持CP210x,CP2130,CDC,FTDI,PL2303和CH34x设备

      无需特殊的root访问权限

      可用于Delphi / C ++ Builder XE6-10.3

      注册版本中包含的源代码

      应用程序中的免版税分配

      Delphi and C++ Builder serial communication library for USB connected devices for Android.

      uses UsbSerial library

      supports CP210x, CP2130, CDC, FTDI, PL2303 and CH34x devices

      no special root access privileges needed

      available for Delphi/C++ Builder XE6 - 10.3

      source code included in registered version

      royalty free distribution in applications

    展开全文
  • Prolific USB-to-Serial Comm Port x64驱动 usb转串口线驱动 Windows 64位
  • <p>Is it possible to remove the serial port from the Digispark attiny85 ? <p>Someone did it for the Arduino Leonardo : https://github.com/arduino/Arduino/issues/6387</p> <p>Thanks by advance <p>...
  • 广州usb数据线生产厂家三、线材缠绕凌乱不堪虽然手机就一部,但是数据线得多备两条啊,居家外出都要用,如果家人的手机接口不一样,又多了好几条。很多人会把数据线随手放在桌上或包包里,这样不但显得凌乱不堪,...

    线身上的污渍很快就脱落了。如果想让线变得更光亮,可以用酒精把纸巾浸湿,然后用湿纸巾在线身上来回擦拭,数据线马上就焕然一新了。广州usb数据线生产厂家三、线材缠绕凌乱不堪虽然手机就一部,但是数据线得多备两条啊,居家外出都要用,如果家人的手机接口不一样,又多了好几条。很多人会把数据线随手放在桌上或包包里,这样不但显得凌乱不堪,线材互相缠绕也不方便及时找到自己要的线。其实有很多小物件可以帮助我们很快地整理凌乱的数据线。

    eMAkfVWeBQoBUv53ZApwwAnprSLvGGLpNABI2GYB.jpeg

    绿线:正电压数据线(标识为:Data+或USB Port +)黑线:接地(标识为:GROUND或GND)。这些都是需要拆开数据线内部才能看到,usb数据线生产厂家比如教授之前拆过的绿联苹果数据线,内部大概是这样:大伙可以对照上面不同颜色的线来简单理解一下。整体来说,类似这样的内部线芯还是不错的。对比一下苹果原装内芯就知道了~不过一般我们购买、使用数据线时,也不会闲着没(qian)事(duo)干去拆开看看里面到底有哪些线。

    xuVOXeNPrQffo4oLz8ccfeq2B3IC3YDls30WF0NO.jpeg

    如果手机上还没有开发人员选项,可进入【设置】-【关于手机】-【版本号】,连续点击N此版本号,直到出现【开发人员选项】即可。如果经过各种检测,usb数据线生产厂家还是只能充电无法传输数据的话,那基本可以判定,你买到的是一根“假数据线”了,也就是说,它其实是充电线,并不是数据线。所以你会发现它是能充电,但并不能传输数据。当然了,也有可能你买的这数据线已经坏了~不知道教授这么一说,有没有说得明白?

    xv3MSdO8C3aStqogz1sKZBwxZlnOtxIVfAP203Yx.jpeg

    有些用户使用较长的数据线质量不行,其实就是真的质量不行,换成短线也一样。所以,我们认为,数据线的长短依照使用习惯即可,广州usb数据线1米和米是数据线的黄金长度,太短了用着累,太长了也不方便,但是只能用3米的情况,也得买不是吗?【粗细很关键吗】数据线的粗细确实比较关键。线材的粗细是由内部线路决定的,如果内部线很细,那么外部不可能使用粗线,否则一捏就瘪,没有意义。

    WtnTZNkvm6R2rb5NuUoWYO3vCupQ9RGj30zrE1Xn.jpeg

    然后数据线和接头采用磁吸的方式连接。这样***大的好处就是用一根数据线,可以分别连接家里不同的电子设备,相比一拖三更稳定一些。usb数据线生产厂家虽然这种数据线的***报道并不多,但是我们依旧还是不推荐购买。【总个结】可能是我们比较传统,也可能是想更加稳定,我们推荐使用苹果设备的朋友使用带MFi认证的、采用TPE材质的、线的长度在1米左右的数据线;推荐Type-C的用户使用线比较粗的。

    1jtVfuECpZGXrwmQp4eCHJNseYk0ZtqLvUWaayBF.jpeg

    再好的数据线经常插拔也会有损耗,但如果平时不注意,每次都使用洪荒之力生拉硬拽,那可能比吊着一位200斤的胖子还要伤线广州usb数据线。充电一定不要过久或者边充边用,不仅对线不好,手机也会躺***。拔掉手机之后及时将数据线收起来,不然耷拉到地上,人来人往难免会踩到,就更别说家里还有汪星人、喵星人这样喜欢破坏的主儿了!日常生活之中关于手机的小配件我们一定是知道,比如手机后面的智商架和懒人手机支架还有一些相关的,像防爆屏幕玻璃。

    PwODUXoVfb3blO9BRpRrImGG3YkNeHMoQeuvsvtS.jpeg

    展开全文

空空如也

空空如也

1 2 3 4 5 ... 20
收藏数 2,649
精华内容 1,059
关键字:

portserialusb