精华内容
下载资源
问答
  • USB Wireless LAN Card

    2018-04-29 12:08:46
    802.11n USB Wireless LAN Card_5.1.21.0_2-2-2015_6.1_x64.zip
  • USB Wireless 网络共享上网
  • REALTEK USB Wireless LAN Utility 最新官方驱动,亲测可用, 支持win7,win8
  • EDUP 300M usb wireless driver win7 64bit 驱动程序
  • REALTEK 11n USB Wireless LAN Utility 网卡驱动。希望大家喜欢
  • REALTEK RTL8187 USB Wireless LAN Driver Setup Utility
  • USB wireless modem driver.rar是用笔记本共享手机上网软件
  • ZigBee3.0 dual USB wireless socket plug', supports: 'on/off', fromZigbee: [fz.on_off], toZigbee: [tz.on_off], } </code></pre> <p>To this: <pre><code> { zigbeeModel: ['TS0112'...
  • 驱动精灵备份的雷凌rt2870 802.11n USB Wireless LAN Card驱动。 适用于腾达W311M无线网卡。
  • 802.11n USB Wireless LAN Card_5.1.7.0_5.1_x86
  • 802.11n USB Wireless LAN Card,无线网卡驱动,无线网卡驱动,无线网卡驱动
  • <p>This works fine to detect all my ethernet interfaces as well as USB wireless, until the wireless adapter is unplugged. Once it is re-plugged, rtnl_link_get returns NULL for the index associated ...
  • When I plug my Logitech usb wireless mouse/keyboard, HID.devices() can list 6 more devices(Not sure why this many?): [ { vendorId: 1133, productId: 50478, path: '\?\hid#vid_046d&pid_c52e&...
  • <p>I would interface my Arduino with the following wireless m-bus USB-adapter, <a href="http://shop.imst.de/wireless-modules/usb-radio-products/10/im871a-usb-wireless-m-bus-usb-adapter-868-mhz?...
  • 802.11n USB Wireless LAN Card_5.1.10.0_2014-09-10 12 25 23.zip
  • <code>Device-2: Realtek RTL8188EUS 802.11n Wireless Network Adapter type: USB driver: r8188eu Installed wavemon in my system Solus Budgie 4. <p>Running <code>sudo wavemon</code> and press F3 i get: ...
  • https://www.playstation.com/en-us/explore/accessories/dualshock-4-usb-wireless-adaptor/</p> <p>It's still for pre-order on most places but I was about to get one from gamestop ...
  • REALTEK11nUSBWirelessLANUtility无线网卡驱动是用来专门配合瑞昱RTL8188RU无线网卡使用的电脑驱动软应用程序,给用户带来稳定高速的上网体验的同时,还可以保证网卡的稳定正常使用有需要的朋友欢迎来下载!...
  • This blogpost listed Linux Compatible USB wireless adapters. It seems that many new Linux users frequently have problems learning how to install RT2870 driver under Linux. I also received email reque....

    This blog post listed Linux Compatible USB wireless adapters. It seems that many new Linux users frequently have problems learning how to install RT2870 driver under Linux. I also received email requesting installation instructions for the same device. This quick tutorial will explains how to install RT2870 based chipset device with WPA2 authentication and TKIP wireless encryption.

    Our Sample Setup

    The following instructions are tested on:

    • Ubuntu Linux 10.04.1 LTS
    • Kernel - Linux 2.6.32-24-generic-pae i686 (32 bit)
    • WPA2 with Linksys 160N router

    RT2870 Chipset Based Devices Are Not Working Out Of Box

    The main problem is conflicting driver which are shipped with default kernel. WPA2 is a method of security wireless networking with optional PSK for home users. The default driver only recognizes driver but always failed to join WPA2 based network. The solution is to install RT2870 driver from the vendor site.

    Step #1: Disable Default Drivers

    Type the following command to black list default drivers:
    $ sudo vi /etc/modprobe.d/blacklist.conf
    Append the following driver names:

    blacklist rt2800usb
    blacklist rt2x00lib
    blacklist rt2x00usb

    Save and close the file. Use the rmmod command to remove current drivers or just reboot the system:
    $ sudo modprobe -r driverName
    # you need to remove all of the above drivers one by one:
    $ sudo modprobe -r rt2800usb

    OR simply reboot the systems:
    $ sudo reboot

    Step 2: Install Compilers

    Type the following command to install required packages so that you can compile source code:
    $ sudo apt-get install build-essential fakeroot dpkg-dev
    Finally, install Linux kernel headers so that you can compile kernel device drivers:
    $ sudo apt-get install linux-headers-$(uname -r)

    Step #3: Download Driver

    Visit this page and download USB drivers [RT2870USB(RT2870/RT2770)].

    Untar Tarball

    Type the following command:
    $ tar -jxvf 2010_0709_RT2870_Linux_STA_v2.4.0.1.tar.bz2
    $ cd 2010_0709_RT2870_Linux_STA_v2.4.0.1

    Compile RT2870 Wireless Lan Linux Driver

    First, edit config.mk file as follows so that Network Manager can be used to set WPA2 auth info:
    $ vi os/linux/config.mk
    Set it as follows:

    # Support Wpa_Supplicant
    HAS_WPA_SUPPLICANT=y
    # Support Native WpaSupplicant for Network Manger
    HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y
    

    Save and close the file. To compile the driver, enter:
    $ make
    Sample outputs:

    make -C tools
    make[1]: Entering directory `/tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/tools'
    gcc -g bin2h.c -o bin2h
    make[1]: Leaving directory `/tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/tools'
    /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/tools/bin2h
    cp -f os/linux/Makefile.6 /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/Makefile
    make -C /lib/modules/2.6.32-24-generic-pae/build SUBDIRS=/tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux modules
    make[1]: Entering directory `/usr/src/linux-headers-2.6.32-24-generic-pae'
      CC [M]  /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.o
      CC [M]  /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_sha2.o
      CC [M]  /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_hmac.o
      CC [M]  /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_aes.o
    ...
    ....
    ..
      CC [M]  /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/rtusb_io.o
      CC [M]  /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/rtusb_bulk.o
      CC [M]  /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/rtusb_data.o
      CC [M]  /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/cmm_data_usb.o
      CC [M]  /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/ee_prom.o
      CC [M]  /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/rtmp_mcu.o
      CC [M]  /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/rtusb_dev_id.o
      CC [M]  /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../os/linux/rt_usb.o
      CC [M]  /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../os/linux/rt_usb_util.o
      CC [M]  /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../os/linux/usb_main_dev.o
      LD [M]  /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/rt2870sta.o
      Building modules, stage 2.
      MODPOST 1 modules
      CC      /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/rt2870sta.mod.o
      LD [M]  /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/rt2870sta.ko
    make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-24-generic-pae'
    

    Note: You may see a LOTs of warnings during the compilation, and this is *normal* so don't panic.

    Install Driver

    Type the following command:
    $ sudo make install
    Sample outputs:

    make -C /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux -f Makefile.6 install
    make[1]: Entering directory `/tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux'
    rm -rf /etc/Wireless/RT2870STA
    mkdir /etc/Wireless/RT2870STA
    cp /tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/RT2870STA.dat /etc/Wireless/RT2870STA/.
    install -d /lib/modules/2.6.32-24-generic-pae/kernel/drivers/net/wireless/
    install -m 644 -c rt2870sta.ko /lib/modules/2.6.32-24-generic-pae/kernel/drivers/net/wireless/
    /sbin/depmod -a 2.6.32-24-generic-pae
    make[1]: Leaving directory `/tmp/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux'
    

    Install Latest Firmware

    Again visit this page and download "Firmware RT28XX/RT30XX USB series (RT2870/RT2770/RT3572/RT3070)". Unzip and install the firemware:
    $ unzip RT2870_Firmware_V22.zip
    $ cd RT2870_Firmware_V22/
    #### Make a backup of existing old firmware ####
    $ mkdir -p $HOME/backup/lib/firmware
    $ cp /lib/firmware/rt2870.bin $HOME/backup/lib/firmware
    #### Install the firmware (for 64 bit Linux systems, you may have to use /lib64/firmware) #####
    $ sudo cp rt2870.bin /lib/firmware/
    ##### **** backup and move existing driver, do NOT SKIP this STEP ****######
    $ sudo mv /lib/modules/$(uname -r)/kernel/drivers/net/wireless/rt2870sta.ko $HOME/backup/

    Update usb.ids

    Type the following commands:
    $ mkdir -p $HOME/backup/var/lib/usbutils
    $ cp /var/lib/usbutils/usb.ids $HOME/backup/var/lib/usbutils
    $ sudo wget -O /var/lib/usbutils/usb.ids http://www.linux-usb.org/usb.ids

    Step #4: Configure Driver

    Connect your USB device and type the following command to verify that Wireless USB LAN adapter is detected:
    $ lsusb
    Sample outputs:

    Bus 002 Device 007: ID 0411:00e8 MelCo., Inc. Buffalo WLI-UC-G300N Wireless LAN Adapter
    Bus 002 Device 006: ID 05ac:0220 Apple, Inc. Aluminum Keyboard (ANSI)
    Bus 002 Device 005: ID 05ac:1006 Apple, Inc. Hub in Aluminum Keyboard
    Bus 002 Device 004: ID 413c:2513 Dell Computer Corp.
    Bus 002 Device 003: ID 413c:2513 Dell Computer Corp.
    Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 007: ID 413c:8160 Dell Computer Corp.
    Bus 001 Device 006: ID 413c:8162 Dell Computer Corp.
    Bus 001 Device 005: ID 413c:8161 Dell Computer Corp.
    Bus 001 Device 004: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
    Bus 001 Device 003: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor
    Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    

    /etc/Wireless/RT2870STA/RT2870STA.dat Configuration

    You need to edit /etc/Wireless/RT2870STA/RT2870STA.dat file, enter:
    $ sudo vi /etc/Wireless/RT2870STA/RT2870STA.dat
    Set SSID (nixcraft is my SSID):

    SSID=nixcraft

    Set country (IN = INDIA, US = USA, etc):

    CountryCode=IN

    Set authentication information (do not skip this if you want WPA2 based authentication):

    AuthMode=WPA2
    EncrypType=TKIP
    WPAPSK=YOUR-PASSWORD-HERE

    See README_STA for other detailed information about each field. Save and close the file.

    Step #5: Connect To the Internet

    Type the ifconfig command and you should see ra0:
    $ ifconfig ra0

    ra0       Link encap:Ethernet  HWaddr 00:1d:73:bc:e4:6e
              inet6 addr: fe80::21d:73ff:febc:e46e/64 Scope:Link
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:5157 errors:0 dropped:0 overruns:0 frame:0
              TX packets:206 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:1093810 (1.0 MB)  TX bytes:16772 (16.7 KB)
    

    You can now connect to the Internet by clicking on Network manager ( The network-manager is the one which is found in the systray. The icon of two computers, one below to the other on the left-side). Clicking on NM-applet will give you the types of connection/hardware you have available > Select Wireless Device > Select nixcraftSSID (or scan of SSID) > Make sure you set "WPA2" as wireless security. Once connected you can browse the Internet or verify IP info:
    $ ifconfig ra0
    Sample outputs:

    ra0       Link encap:Ethernet  HWaddr 00:1d:73:bc:e4:6e
              inet addr:192.168.1.103  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::21d:73ff:febc:e46e/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:6711 errors:0 dropped:0 overruns:0 frame:0
              TX packets:271 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:1420879 (1.4 MB)  TX bytes:22312 (22.3 KB)

    Verify gateway or just ping to public ip:
    $ route -n
    $ ping google.com
    $ ping cyberciti.biz

    A Note About Kernel Upgrades

    You need to reinstall the driver using the above steps.

    转载于:https://www.cnblogs.com/tengyft/p/4073165.html

    展开全文
  • 无线网卡驱动程序+REALTEK USB Wireless LAN Driver and Utility +(windowsxp+windowsMe+windows98+windows2000+xp64 的 无线网卡驱动)这个是我从光盘里面复制出来的驱动都在各个前面名字的文件夹里面,自己找找,...
  • 台式机上弄了个USB无线网卡,无线网卡是

    台式机上弄了个USB无线网卡,无线网卡是EDUP-N1556,也就是RTL8192C的驱动,然后Centos5.5上肯定没有这个,折腾到了凌晨一点才搞定!

    原因是iwconfig无法支持wpa,如果无线路由器是wpa加密的,要使用wpa_supplicant工具来生成连接密钥和启动无线网卡。

    无线网卡是在京东上买的:http://item.jd.com/844287.html,EDUP-N1556,实际上芯片是RTL8188C_8192C_USB_linux_v4.0.2。

    驱动下载:http://www.edup.cn/showinfo559.aspx,linux下需要下载源码编译。

    安装kernel

    编译驱动时需要kernel的开发包。可以从光盘源安装:

    sudo mkdir -p /media/cdrom && 
    sudo mount /dev/cdrom /media/cdrom && 
    sudo yum --disablerepo=* --enablerepo=c5-media install -y kernel-devel kernel-xen-kernel

    安装完成后就可以开始编译驱动。

    编译驱动

    驱动源码解压后的目录是:RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911

    下面有install.sh,可以直接执行:

    sudo bash install.sh 

    没有网络只能通过usb拷贝驱动代码到centos5.5上面,然后编译时报错:

    [winlin@localhost RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911]$ sudo bash install.sh
    /home/winlin/tools/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/include/osdep_service.h:865: error: redefinition of ‘skb_tail_pointer’
    include/linux/skbuff.h:922: error: previous definition of ‘skb_tail_pointer’ was here

    一大堆这个错误。查看代码:

    vi driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/include/osdep_service.h 

    行数是865行:

    #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22))
    // Porting from linux kernel, for compatible with old kernel.
    static inline unsigned char *skb_tail_pointer(const struct sk_buff *skb)
    {
            return skb->tail;
    }
    
    static inline void skb_reset_tail_pointer(struct sk_buff *skb)
    {
            skb->tail = skb->data;
    }
    
    static inline void skb_set_tail_pointer(struct sk_buff *skb, const int offset)
    {
            skb->tail = skb->data + offset;
    }

    查看centos5.5的内核:

    [winlin@localhost RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911]$ uname -r
    2.6.18-194.el5xen

    也就是说,centos使用的内核很老,但是这些比较新的函数自己合并过去了的,所以只需要把上面的函数注释掉就可以:

    #if 0 && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22))
    // Porting from linux kernel, for compatible with old kernel.
    static inline unsigned char *skb_tail_pointer(const struct sk_buff *skb)
    {
            return skb->tail;
    }
    
    static inline void skb_reset_tail_pointer(struct sk_buff *skb)
    {
            skb->tail = skb->data;
    }

    在最前面的宏定义判断那里加上#if 0 &&。然后重新执行sudo bash install.sh,安装成功,内核模块已经安装好了:

    [root@localhost RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911]# lsmod|grep 8192cu
    8192cu                662208  0 

    下面就可以编译wpa工具,以及使用ifconfig管理网卡。

    IFCONFIG

    驱动编译安装好后,就可以用ifconfig打开设备,扫描附近的无线网络了。

    如果没有iwlist和iwconfig可以编译:

    cd RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/wireless_tools/wireless_tools.30.rtl && make

    首先,看看设备叫什么:

    [root@localhost wireless_tools.30.rtl]# ./iwconfig 
    wlan0     IEEE 802.11bg  ESSID:"winlin-1st"  Nickname:"<WIFI@REALTEK>"
              Mode:Managed  Frequency:2.472 GHz  Access Point: B0:48:7A:39:5F:F6   
              Bit Rate:54 Mb/s   Sensitivity:0/0  
              Retry:off   RTS thr:off   Fragment thr:off
              Encryption key:****-****-****-****-****-****-****-****   Security mode:open
              Power Management:off
              Link Quality=99/100  Signal level=51/100  Noise level=0/100
              Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
              Tx excessive retries:0  Invalid misc:0   Missed beacon:0

    上面是已经连接上的无线网卡信息,可见名字叫做wlan0。

    然后,用ifconfig打开设备:

    [root@localhost wireless_tools.30.rtl]# ifconfig wlan0 up && ifconfig wlan0
    wlan0     Link encap:Ethernet  HWaddr E8:4E:06:17:5C:8E  
              inet addr:192.168.1.113  Bcast:255.255.255.255  Mask:255.255.255.0
              inet6 addr: fe80::ea4e:6ff:fe17:5c8e/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:3360 errors:0 dropped:36 overruns:0 frame:0
              TX packets:4886 errors:0 dropped:2 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:392496 (383.2 KiB)  TX bytes:5934066 (5.6 MiB)

    接着,看有哪些无线网络可以连:

    [root@localhost wireless_tools.30.rtl]# ./iwlist wlan0 scan
              Cell 01 - Address: B0:48:7A:39:5F:F6
                        ESSID:"winlin-1st"
                        Protocol:IEEE 802.11bg
                        Mode:Master
                        Frequency:2.472 GHz (Channel 13)
                        Encryption key:on
                        Bit Rates:54 Mb/s
                        Extra:wpa_ie=dd160050f20101000050f2041000050f202
                        IE: WPA Version 1
                            Group Cipher : CCMP
                            Pairwise Ciphers (1) : CCMP
                            Authentication Suites (1) : PSK
                        Extra:rsn_ie=30140100000fac0401000fac020100
                        IE: IEEE 802.11i/WPA2 Version 1
                            Group Cipher : CCMP
                            Pairwise Ciphers (1) : CCMP
                            Authentication Suites (1) : PSK
                           Preauthentication Supported
                        Quality=99/100  Signal level=51/100  

    下面就可以用wpa工具连接网络了。iwconfig无法连接wpa加密的网络

    WPA工具

    编译wpa工具:

    cd RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/wpa_supplicant_hostapd &&
    tar xf wpa_supplicant_hostapd-0.8_rtw_r7475.20130812.tar.gz &&
    cd wpa_supplicant_hostapd-0.8_rtw_r7475.20130812 &&
    cd wpa_supplicant/ &&
    make

    然后使用命令生成配置文件:

    ./wpa_passphrase winlin-1st 8u23j302j >winlin-1st.conf

    其中,winlin-1st是要连接的那个无线网络的ssid,后面的8u23j302j是密码,这个会生成配置文件。

    启动和配置无线网卡,连接到winlin-1st网络:

    ./wpa_supplicant -i wlan0 -c winlin-1st.conf 

    然后使用dhclient获取IP:

    sudo dhclient wlan0

    可以写入/etc/rc.local:

    # winlin
    echo "start wlan0 network"
    nohup /home/winlin/tools/wpa/wpa_supplicant -i wlan0 -c /home/winlin/tools/wpa/winlin-1st.conf >/dev/null 2>&1 &
    sleep 2 && echo "dhclient wlan0" && dhclient wlan0
    
    echo "ok for winlin"

    启动后,等会就发现正常获取了ip。用iwconfig看也连接上了。

    ifconfig wlan0
    wlan0     Link encap:Ethernet  HWaddr E8:4E:06:17:5C:8E  
              inet addr:192.168.1.113  Bcast:255.255.255.255  Mask:255.255.255.0
              inet6 addr: fe80::ea4e:6ff:fe17:5c8e/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:3914 errors:0 dropped:36 overruns:0 frame:0
              TX packets:5309 errors:0 dropped:2 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:461213 (450.4 KiB)  TX bytes:6025999 (5.7 MiB)

    iwconfig wlan0
    wlan0     IEEE 802.11bg  ESSID:"winlin-1st"  Nickname:"<WIFI@REALTEK>"
              Mode:Managed  Frequency:2.472 GHz  Access Point: B0:48:7A:39:5F:F6   
              Bit Rate:54 Mb/s   Sensitivity:0/0  
              Retry:off   RTS thr:off   Fragment thr:off
              Encryption key:****-****-****-****-****-****-****-****   Security mode:open
              Power Management:off
              Link Quality=100/100  Signal level=56/100  Noise level=0/100
              Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
              Tx excessive retries:0  Invalid misc:0   Missed beacon:0

    注意一定不能用iwconfig来配置网卡连接wpa网络,连不上的。

    使用网络

    后面使用网络就简单了:

    [root@localhost ~]# curl http://ossrs.net
    <!DOCTYPE html>
    <html>
    <head>
        <title>开源的SRS</title>
        <meta charset="utf-8">
        <script type="text/javascript">
            var url = "srs.release/releases/index.html";
            setTimeout(function(){
                window.location.href = url;
            }, 1000); 
        </script>
    </head>
    <body>
        <div><a href="srs.release/releases/index.html" target="_self">正在跳转中...</a></div>
        <div><a href="http://www.miitbeian.gov.cn">京ICP备14026077号</a></div>
    </body>
    </html>

    正常使用就可以了。


    Winlin 2014.11

    展开全文
  • 主要用于出差,需要网络的,可以手机发热点,笔记本电脑就可以上网了,比较方便,也可以在家用。本人第一次用时,买的360无线网卡,装完驱动依然不能用,安装此驱动即可
  • 1 setup card power iwconfig wlan0 txpower on 2 setup essid iwconfig wlan0 essid "The Coffee Bean Free Wi-Fi" 3 setup ip (dynamic) dhclient wlan0 Note: ...
    1 setup card power

    iwconfig wlan0 txpower on

    2 setup essid

    iwconfig wlan0 essid "The Coffee Bean Free Wi-Fi"

    3 setup ip (dynamic)

    dhclient wlan0

    Note:

    a: use "sudo" if you are net root
    b: use "iwlist" to get essid
    展开全文
  • Ralink driver Ralink Driver must be compiled. Ralink only supports Infrastructure and Ad-Hoc mode. 1. Download the Linux driver from Ralink ...RT3070/RT3072/RT3370/RT5370/RT5372 all-in-one drive...
    Ralink driver

    Ralink Driver must be compiled. Ralink only supports Infrastructure and Ad-Hoc mode.

    1. Download the Linux driver from Ralink

    RT3070/RT3072/RT3370/RT5370/RT5372 all-in-one driver package. The latest version is v2.5.0.3

    http://www.ralinktech.com/en/04_support/support.php?sn=501

    2. Extract the package to user home, and rename the directory name to sta, for example.

    3. Change HAS_WPA_SUPPLICANT and AS_NATIVE_WPA_SUPPLICANT_SUPPORT from n to y in os/linux/config.mk

    # Support Wpa_Supplicant

    HAS_WPA_SUPPLICANT=y

    # Support Native Wpa_Supplicant for Network Maganger

    HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y

    4. now just make, make install, and register your module with modprobe

    sudo su
    make
    make install
    modprobe rt5370sta

    5. To enable the module at each boot add your module to /etc/modules

    echo rt5370sta >> /etc/modules
    展开全文
  • -kali1-amd64/kernel/drivers/net/wireless/sbin/depmod -a 4.3 . 0 -kali1-amd64   install it ,其实我并不知道-a是什么作用。看了一下install的help 也没有找到-a参数 不明白这里。 我直接操作的前面...
  • usb_wireless

    2011-02-25 18:59:52
    usb_wireless usb_wireless usb_wireless
  • wireless usb

    2013-06-01 13:41:37
    无线USB开发技术,嵌入式USB,PC USB,IC,FPGA
  • Wireless USB specification

    2009-06-15 17:08:20
    Wireless USB Specification
  • wireless usb WUSBSpec

    2008-11-24 16:58:19
    wireless usb WUSBSpec

空空如也

空空如也

1 2 3 4 5 ... 20
收藏数 2,004
精华内容 801
关键字:

usbwireless