精华内容
下载资源
问答
  • Your transaction was saved,rerun it with:

    千次阅读 2019-07-27 13:24:57
    yum install openssl-libs or yum update && yum install telnet -y Total download size: 1.7 M Is this ok [y/d/N]: Exiting on user command...Your transaction was saved, rerun it with: yum load-t...
    yum install openssl-libs 
    or yum update && yum install telnet -y 
    Total download size: 1.7 M
    Is this ok [y/d/N]: Exiting on user command
    Your transaction was saved, rerun it with:
     yum load-transaction /tmp/yum_save_tx.2019-07-27.01-16.IGhXnU.yumtx
    

      包安装过程中需要确认,两个并列命令需要两个-y

    关于使用yum“The program package-cleanup is...”的解决办法

    在使用yum 时总是有提示信息: 

    The program package-cleanup is found in the yum-utils package. 

    或者提示: 

    There are unfinished transactions remaining. You might consider running yum-complete-transaction first to finish them. 

    The program yum-complete-transaction is found in the yum-utils package. 

    处理步骤: 

    # 安装 yum-complete-transaction 

    yum install yum-utils 

    # 运行 yum-complete-transaction 

    yum-complete-transaction --cleanup-only 

    # 清除可能存在的重复包 

    package-cleanup --dupes 

    # 清除可能存在的损坏包 

    package-cleanup --problems 

    问题解决!

    2,

    报错:

    You could try using --skip-broken to work around the problem
    You could try running: package-cleanup --problems
    package-cleanup --dupes
    rpm -Va --nofiles --nodigest
    The program package-cleanup is found in the yum-utils package.

    解决:

    yum clean all
    rpm --rebuilddb
    yum update

    或者换一个yum源

    删掉原来的需要的包,重新安装

    展开全文
  • 在启动IAM的的时候出现了如下的错误 Info: Data source is: opss-DBDS WLS ManagedService is not up running. Fall back to use system properties for ...Error: Diagnostics data was not saved to the crede
    在启动IAM的的时候出现了如下的错误
    Info: Data source is: opss-DBDS

    WLS ManagedService is not up running. Fall back to use system properties for configuration.
    Error: Diagnostics data was not saved to the credential store.
    Error: Validate operation has failed.
    Need to do the security configuration first!
    解决方案:
    进行配置:
    <MW_HOME>/oracle_common/common/bin/wlst.sh <IAM_HOME>/common/tools/configureSecurityStore.py -d <domaindir> -c IAM -p <opss_schema_password> -m create

    [oracle@training bin]$ /u01/iam/oracle_common/common/bin/wlst.sh /u01/iam/Oracle_IAM1/common/tools/configureSecurityStore.py -d /u01/iam/user_projects/domains/iam_domain -c IAM -p welcome1 -m create

    让配置生效:
    <MW_HOME>/oracle_common/common/bin/wlst.sh <IAM_HOME>/common/tools/configureSecurityStore.py -d <domaindir> -m validate

    [root@training bin]# /u01/iam/oracle_common/common/bin/wlst.sh /u01/iam/Oracle_IAM1/common/tools/configureSecurityStore.py -d /u01/iam/user_projects/domains/iam_domain -c IAM -p welcome1 -m validate
    展开全文
  • 问题说明:  主模块在调用Dll的导出函数...vaule of ESP was not properly saved across a function call.  上面出现的错误是系统提示主模块调用前堆栈的指针(ESP),与调用导出函数后的指针不符。  一般有
    问题说明: 
    
    主模块在调用Dll的导出函数时会保存返回地址在堆栈中(ESP+xxx)。函数调用返回时,会弹栈取得返回地址(ESP-xxx),从而返回到主模块。 

    vaule of ESP was not properly saved across a function call. 

    上面出现的错误是系统提示主模块调用前堆栈的指针(ESP),与调用导出函数后的指针不符。 

    一般有两种情况会出现类似错误。 
    1. Dll导出函数声明导出方法,与主模块中声明的导入方法不一致。使得调用时参数的传递中,破坏了调用堆栈,出现错误。 

    2. Dll导出函数本身破坏了调用堆栈。编码中最一般的错误比如:对象(如CString)等。 

    解决方法: 
    针对第1种情况,请确定导出方(Dll等)与导入方(Exe等)的声明保持一致。 
    对于第2种情况,请保证产生的对象都被安全的释放。 

    备注: 
    可以试试下面的方法可以简单的测试方法 

    将Dll的导出函数定义成空处理(直接返回),如还出现错误,则是调用错误。


    展开全文
  • - Open a saved found cache - Select Menu - Vote - Select a score (in case it already has an own vote, select a scrore different to the existing) and send it - An error toast is shown about the wrong ...
  • typedef BOOL(WINAPI *pProcessInternalW)(HANDLE hToken, LPCWSTR AppName, LPWSTR CmdLine, LPSECURITY_ATTRIBUTES ProcessAttr, LPSECURITY_ATTRIBUTES ThreadAttr, BOOL bIH, DWORD flags, LPVOID env, LPCWS....
    typedef BOOL(WINAPI *pProcessInternalW)(HANDLE hToken, LPCWSTR AppName, LPWSTR CmdLine,
    	LPSECURITY_ATTRIBUTES ProcessAttr, LPSECURITY_ATTRIBUTES ThreadAttr,
    	BOOL bIH, DWORD flags, LPVOID env, LPCWSTR CurrDir,
    	LPSTARTUPINFOW si, LPPROCESS_INFORMATION pi, PHANDLE NewToken);

    添加WINAPI即可,告诉系统这是个回调方法。

    展开全文
  • Run-Time Check Failure #0,The value of ESP was not properly saved 错误解决.pdf
  • 在程序运行的时候,可能...Run-Time Check Failure #0 - The value of ESP was not properly saved across a function call. This is usually a result of calling a function declared with one calling convention wi
  • Run-Time Check Failure #0 - The value of ESP was not properly saved across a function call. This is usually a result of calling a function declared with one calling ...
  • 1. The value of ESP was not properly saved across a function call 出现这种错误以前摸不着头脑,如坠五里雾。现在知道了,是函数接口定义格式不对 如我使用cocos2d::ui::Button时,定义点击函数: Button*...
  • 在操作ROR文件的时候,由于编辑器的原因,可能会遇到Your template was not saved as valid UTF-8.错误,解决方法如下: 1. 在文件头加上# encoding: utf-8 2.在application.rb 文件里加上 config.encoding = "utf...
  • Run-Time Check Failure #0 - The value of ESP was not properly saved across a function call. This is usually a result of calling a function declared with one calling convention with a
  • The value of ESP was not properly...快速解决 今天遇到这个问题,真的是非常头疼,期间电脑居然崩掉一次。所以,分享一下解决办法。 如果是:类定义的时候,新添加了属性,重载构造函数导致此错误,参考以下方法...
  • The value of ESP was not properly saved across a function call. This is usually a result of calling a function declared with one calling convention with a function pointer declared w
  • 调用DLL函数,出现错误Run-Time Check Failure #0 - The value of ESP was not properly saved across a function call. This is usually a result of calling a function declared with one calling convention ...
  • 最近由于写程序时需要动态加载dll,在获取函数如后地址后,调用函数返回时vaule of ESP was not properly saved across a function call.错误,很是烦恼,在网上找解决的方法,,大多千篇一律,后来在...
  • Run-Time Check Failure #0 - The value of ESP was not properly saved across a function call. This is usually a result of calling a function declared with one calling convention with a f
  • DLL 调用错误 -The value of ESP was not properly saved across a function call. 在调用DLL中的函数有时候会出现如下对话框的错误:Microsoft Visual C++ Debug Library: Debug Error: Program: ... ...
  • https://stackoverflow.com/questions/142644/weird-msc-8-0-error-the-value-of-esp-was-not-properly-saved-across-a-function
  • DLL 调用错误 -The value of ESP was not properly saved across a function call. 在调用DLL中的函数有时候会出现如下对话框的错误: Microsoft Visual C++ Debug Library: Debug Error: Program: ... ...

空空如也

空空如也

1 2 3 4 5 ... 20
收藏数 34,063
精华内容 13,625
关键字:

savedwas