精华内容
下载资源
问答
  • 场景说明 使用isotousb或者UltraISO,刻录livecd 到USB设备,然后从USB设备启动,错误提示如下: ...no default or UI configuration directive found boot:(具体意思:找不到任何的默认启动配置文件) ...

    场景说明

        使用isotousb或者UltraISO,刻录livecd 到USB设备,然后从USB设备启动,错误提示如下:

    start booting from USB device.........

    no default or UI configuration directive found

    boot:(具体意思:找不到任何的默认启动配置文件)


    环境分析

        查看USB设备的根目录下isolinux文件中,发现有一个syslinux.cfg的文件夹,文件夹内容为空,存在文件isolinux.cfg文件,里面详细描述了启动的配置内容,类似于GRUB的memlst文件


    原因分析

        livecd 刻录到U盘上,需要一个syslinux.cfg的配置文件,对系统启动进行配置,说明在刻录的过程中,没有将isolinux.cfg文件名称进行修改,导致了问题的出现

    解决方案:删除syslinux.cfg文件夹,然后重命名isolinux.cfg为syslinux.cfg,查看syslinux.cfg里里面是否正常存在配置信息,重启服务器




         本文转自fengyuzaitu 51CTO博客,原文链接:http://blog.51cto.com/fengyuzaitu/1434164,如需转载请自行联系原作者
    展开全文
  • No DEFAULT or UI configuration directive found! 解决方法:我使用第一条就成功了 在报错信息后面的boot命令行输入:/isolinux/vmlinuz initrd=/isolinux/initrd.img如果不行重新输入/isolinux/vmlinuz initrd=...

    虚拟机安装OracleLinux出错:

    No DEFAULT or UI configuration directive found!  

    解决方法:我使用第一条就成功了

    在报错信息后面的boot命令行输入:
    /isolinux/vmlinuz initrd=/isolinux/initrd.img

    如果不行

    重新输入
    /isolinux/vmlinuz initrd=/isolinux/initrd.img xdriver=vesa nomodeset



    boot:
    /isolinux/vmlinuz initrd=/isolinux/initrd.img


    boot:
    /isolinux/vmlinuz initrd=/isolinux/initrd.img xdriver=vesa nomodeset

    转载于:https://www.cnblogs.com/oraclesea/p/5175737.html

    展开全文
  • 场景说明  使用isotousb或者UltraISO,刻录livecd 到USB设备,然后从USB设备启动,...no default or UI configuration directive found boot:(具体意思:找不到任何的默认启动配置文件) 环境分析  查看U

    场景说明

        使用isotousb或者UltraISO,刻录livecd 到USB设备,然后从USB设备启动,错误提示如下:

    start booting from USB device.........

    no default or UI configuration directive found

    boot:(具体意思:找不到任何的默认启动配置文件)


    环境分析

        查看USB设备的根目录下isolinux文件中,发现有一个syslinux.cfg的文件夹,文件夹内容为空,存在文件isolinux.cfg文件,里面详细描述了启动的配置内容,类似于GRUB的memlst文件


    原因分析

        livecd 刻录到U盘上,需要一个syslinux.cfg的配置文件,对系统启动进行配置,说明在刻录的过程中,没有将isolinux.cfg文件名称进行修改,导致了问题的出现

    解决方案:删除syslinux.cfg文件夹,然后重命名isolinux.cfg为syslinux.cfg,查看syslinux.cfg里里面是否正常存在配置信息,重启服务器

    展开全文
  • 安装linux 系统报错:No DEFAULT or UI configuration directive found 解决方法

    安装linux 系统报错:No DEFAULT or UI configuration directive found 解决方法

    参考文章:

    (1)安装linux 系统报错:No DEFAULT or UI configuration directive found 解决方法

    (2)https://www.cnblogs.com/itcx/p/4288468.html


    备忘一下。


    展开全文
  • 这几天用UltraISO制作U盘镜像安装...no default or UI configuration directive found boot: 解决的办法就是把ioslinux文件夹名称改成syslinux,同时把这个目录下的isolinux.cfg改成syslinux.cfg。再次启动,就可以进
  • 最近在安装Oracle Linux虚拟机的时候,出现了“No DEFAULT or UI configuration directive found!”这个错误。查阅互联网上的文章后,有人说在boot命令行输入以下指令可以解决问题: /isolinux/vmlinuz initrd=/...
  • 1)原因是用LiveUSB Creator选择*.ISO 时,那个Fedora-16-i686-Live-Desktop.iso所在的目录名不能有中文。虽然我的目录名没有中文,但磁盘名有中文,于是删掉中文磁盘备注,...
  • 靠,以后再也不用浏览器自带的下载工具下载镜像文件了,原来是下载的不完整,但是显示完全下载完毕了,真特么误导人。文件的checksum不对。     references: ...
  • CentOS yum安装报错,并有下图所示的提示: 解决办法: vi /etc/sysconfig/network-scripts/ifcfg-ens33 修改 ifcfg-ens33 文件 (文件名可能不一样) ...将ONBOOT:no修改为ONBOOT:yes 然后再重启网络...
  • 今天准备在台式机上装Fedora 16,使用Fedora LiveUSB Creator制作USB启动盘...No DEFAULT or UI configurationdirective found! boot: (这里就是光标闪啊闪的)   使用sogou了一下,没有看到有人有同样的症状。不
  • 安装教程参考:https://blog.csdn.net/nuoyanli/article/details/86503686 按照教程装完之后,启动虚拟机失败,显示如题错误。 ...查找资料后发现,应该使用第三方软件下载镜像文件,切勿使用自带浏览器。 ...
  • <div><p>Hi, I'...Error:: cannot stat default: no such file or directory <p>where can I find the linshare ui-user.conf</p><p>该提问来源于开源项目:linagora/linshare</p></div>
  • you will get this error if a config has no default VRFs. AttributeError: 'Routers' object has no attribute 'default_vrf' <p><strong>To Reproduce Create device config with devices that...
  • if 10.15 or later, if the user gives no command line parameters, instead of launching the GUI, it will launch <code>consoleui</code> in Terminal. <p>I don't have a Mac (this work is based on ...
  • No workspace UI logic

    2020-12-02 04:06:02
    <p>Lastly, we have to figure out how this behaves when no workspaces are detected on login. I propose we still let the user into the app, but show this overlay right away, so they have to create a ...
  • <p>In current builds I get a new empty zip file at <code>openjk.pk3, but I no longer get the cgame, ui or jampgame DLLs. <p>Unpacking DLLs from the pk3 file is not implemented on Linux, so it's OK...
  • Change the port and/or protocol in the Admin UI. Verify /etc/system.properties has the correct value for property: org.codice.ddf.system.port <h4>Any background context you want to provide? <h4>What ...
  • Section or Column UI

    2021-01-09 06:28:09
    <div><p>The UI for a Section seems it should show "Section" before the default "Column". In the current version, the hierarchy makes it appear that the Column is holding the Section. ...
  • <p>It would be really useful to have a display mode like <code>standalone-no-ui, which would hide the operating system's default window chrome. The Web app would then essentially have a blank ...
  • <p>In summary, please regard the primary goal of the extension to open a new tab in a container of my choosing and not manage all the possible options the extension has or will have. Managing options ...
  • <div><p>What do we plan to have as the default UI: GUI or CLI? <p>We can use <a href="https://golang.org/pkg/go/build/">build tags</a> to enable the alternative UI (or disable the default UI). <p>For ...
  • <p>I am using the default Valo theme. I have copied the following code into the UI.java generated by the Vaadin Maven Archetype: <pre><code> protected void init(VaadinRequest vaadinRequest) { final...
  • s a bug or it's my misinterpretation. <p>When you create a bool field and select "Hide field from UI", the field is not saved with the "Default Value" in database when pod is ...
  • They set up branch filter for webhook plugin to get alerts only for default branch, not for features.Or turning on the checkbox saying that this webhook is triggered only if it's default branch. ...
  • 2018-01-25 03:52:05: (mod_fastcgi.c.984) bind failed for: unix:/var/run/lighttpd/php.socket-0 No such file or directory 2018-01-25 03:52:05: (mod_fastcgi.c.1406) [ERROR]: spawning fcgi failed. ...
  • - <strong>DetectionsUI</strong> - Makes an API call to <code>/or</code> endpoint for the given photo, displays rectangles with detected traffic signs on top of the viewer. - <strong>EventUI</strong> -...
  • No logs available in UI

    2021-01-07 03:20:46
    <p>When starting an experiment I expect logs to be viewable in the UI, however no logs are found. I can fetch the logs with <code>kubectl logs -f -n polyaxon <pod></code>. The artifactsStore ...

空空如也

空空如也

1 2 3 4 5 ... 20
收藏数 4,288
精华内容 1,715
关键字:

defaultnoorui