精华内容
下载资源
问答
  • ubuntu查看cpu温度

    千次阅读 2019-08-30 10:56:20
    第一步:安装lm-sensors,打开终端键入 ...在你想要显示传感器温度的面板位置右键,选择“添加到面板”菜单命 令,在列表中选择 “Hardware Sensors Monitor”后单击“添加”按钮即可添加该Applet程序。能直接检测...

    第一步:安装lm-sensors,打开终端键入

    sudo apt-get install lm-sensors sensors-applet

    根据提示键入Root密码,然后等待下载并安装完后关闭终端。在你想要显示传感器温度的面板位置右键,选择“添加到面板”菜单命

    令,在列表中选择 “Hardware Sensors Monitor”后单击“添加”按钮即可添加该Applet程序。能直接检测到传感器那最好了。如果没有

    检测到传感器(我的正常显示),显示”No sensors found”则转到下一步。

    第二步:手动配置传感器

    只要回答YES和按回车就可以了,和Windows里的‘下一步‘很像

    sudo sensors-detect

    会显示一堆东西,看不懂,贴出来

    louis@Ubuntu-desktop:~$ sudo sensors-detect
    # sensors-detect revision 4171 (2006-09-24 03:37:01 -0700)

    This program will help you determine which kernel modules you need
    to load to use lm_sensors most effectively. It is generally safe
    and recommended to accept the default answers to all questions,
    unless you know what you’re doing.

    We can start with probing for (PCI) I2C or SMBus adapters.
    Do you want to probe now? (YES/no): yes
    Probing for PCI bus adapters…
    Use driver `i2c-viapro’ for device 0000:00:11.0: VIA Technologies VT8233A/8235 South Bridge

    We will now try to load each adapter module in turn.
    Module `i2c-viapro’ already loaded.
    If you have undetectable or unsupported adapters, you can have them
    scanned by manually loading the modules before running this script.

    To continue, we need module `i2c-dev’ to be loaded.
    Do you want to load `i2c-dev’ now? (YES/no): yes
    Module loaded successfully.

    We are now going to do the I2C/SMBus adapter probings. Some chips may
    be double detected; we choose the one with the highest confidence
    value in that case.
    If you found that the adapter hung after probing a certain address,
    you can specify that address to remain unprobed.

    Next adapter: SMBus Via Pro adapter at 0400
    Do you want to scan it? (YES/no/selectively): yes
    Client found at address 0×4c
    Handled by driver `lm90′ (already loaded), chip type `lm90′
    Client found at address 0×4e
    Probing for `National Semiconductor LM75′…                No
    Probing for `Dallas Semiconductor DS1621′…                No
    Probing for `Analog Devices ADM1021′…                     No
    Probing for `Analog Devices ADM1021A/ADM1023′…            No
    Probing for `Maxim MAX1617′…                              No
    Probing for `Maxim MAX1617A’…                             No
    Probing for `TI THMC10′…                                  No
    Probing for `National Semiconductor LM84′…                No
    Probing for `Genesys Logic GL523SM’…                      No
    Probing for `Onsemi MC1066′…                              No
    Probing for `Maxim MAX1619′…                              No
    Probing for `National Semiconductor LM82/LM83′…           No
    Probing for `Maxim MAX6659′…                              No
    Probing for `Maxim MAX6633/MAX6634/MAX6635′…              No
    Probing for `ITE IT8201R/IT8203R/IT8206R/IT8266R’…        No
    Probing for `Fintek F75111R/RG/N (GPIO)’…                 No
    Probing for `Fintek F75121R/F75122R/RG (VID+GPIO)’…       No
    Client found at address 0×50
    Probing for `Analog Devices ADM1033′…                     No
    Probing for `Analog Devices ADM1034′…                     No
    Probing for `SPD EEPROM’…                                 Success!
    (confidence 8, driver `eeprom’)
    Probing for `EDID EEPROM’…                                No
    Probing for `Maxim MAX6900′…                              No
    Client found at address 0×51
    Probing for `Analog Devices ADM1033′…                     No
    Probing for `Analog Devices ADM1034′…                     No
    Probing for `SPD EEPROM’…                                 Success!
    (confidence 8, driver `eeprom’)
    Client found at address 0×69

    Some chips are also accessible through the ISA I/O ports. We have to
    write to arbitrary I/O ports to probe them. This is usually safe though.
    Yes, you do have ISA I/O ports even if you do not have any ISA slots!
    Do you want to scan the ISA I/O ports? (YES/no): yes
    Probing for `National Semiconductor LM78′ at 0×290…       No
    Probing for `National Semiconductor LM78-J’ at 0×290…     No
    Probing for `National Semiconductor LM79′ at 0×290…       No
    Probing for `Winbond W83781D’ at 0×290…                   No
    Probing for `Winbond W83782D’ at 0×290…                   No
    Probing for `Winbond W83627HF’ at 0×290…                  No
    Probing for `Silicon Integrated Systems SIS5595′…         No
    Probing for `VIA VT82C686 Integrated Sensors’…            No
    Probing for `VIA VT8231 Integrated Sensors’…              No
    Probing for `AMD K8 thermal sensors’…                     No
    Probing for `IPMI BMC KCS’ at 0xca0…                      No
    Probing for `IPMI BMC SMIC’ at 0xca8…                     No

    Some Super I/O chips may also contain sensors. We have to write to
    standard I/O ports to probe them. This is usually safe.
    Do you want to scan for Super I/O sensors? (YES/no): yes
    Probing for Super-I/O at 0×2e/0×2f
    Trying family `ITE’…                                      Yes
    Found `ITE IT8705F Super IO Sensors’                        Success!
    (address 0×290, driver `it87′)
    Trying family `National Semiconductor’…                   No
    Trying family `SMSC’…                                     No
    Trying family `VIA/Winbond/Fintek’…                       No
    Probing for Super-I/O at 0×4e/0×4f
    Trying family `ITE’…                                      Yes
    Found `ITE IT8705F Super IO Sensors’                        Success!
    (address 0×290, driver `it87′)
    Trying family `National Semiconductor’…                   No
    Trying family `SMSC’…                                     No
    Trying family `VIA/Winbond/Fintek’…                       No

    Now follows a summary of the probes I have just done.
    Just press ENTER to continue: ENTER

    Driver `lm90′ (should be inserted):
    Detects correctly:
    * Bus `SMBus Via Pro adapter at 0400′
    Busdriver `i2c-viapro’, I2C address 0×4c
    Chip `lm90′ (confidence: 6)

    Driver `eeprom’ (should be inserted):
    Detects correctly:
    * Bus `SMBus Via Pro adapter at 0400′
    Busdriver `i2c-viapro’, I2C address 0×50
    Chip `SPD EEPROM’ (confidence: 8)
    * Bus `SMBus Via Pro adapter at 0400′
    Busdriver `i2c-viapro’, I2C address 0×51
    Chip `SPD EEPROM’ (confidence: 8)

    EEPROMs are *NOT* sensors! They are data storage chips commonly
    found on memory modules (SPD), in monitors (EDID), or in some
    laptops, for example.

    Driver `it87′ (should be inserted):
    Detects correctly:
    * ISA bus address 0×0290 (Busdriver `i2c-isa’)
    Chip `ITE IT8705F Super IO Sensors’ (confidence: 9)

    I will now generate the commands needed to load the required modules.
    Just press ENTER to continue: ENTER

    To make the sensors modules behave correctly, add these lines to
    /etc/modules:

    #—-cut here—-
    # I2C adapter drivers
    i2c-viapro
    # Chip drivers
    lm90
    eeprom
    it87
    #—-cut here—-

    第三步:安装其他监控软件xsensors,ksensors,gdesklets(gdesklets里有很多桌面小程序),Gkrellm,hddtemp等,自己选择安装。

    sudo apt-get install xsensors或者ksensors(KDE中推荐使用ksensors)

    sudo apt-get install gdesklets gkrellm

    sudo apt-get install hddtemp

    在终端里查看:

    iletit@ubuntu:~$ sensors
    acpitz-virtual-0
    Adapter: Virtual device
    temp1:       +52.0°C  (crit = +110.0°C)

    iletit@ubuntu:~$

    网上的教材显示了很多东西,我的只显示了这么点,可能是硬件不同,或者是我少操作的些什么东西不过能看到温度就可以了。
    下面还有一种是图形界面的,非常直观

    工具叫GNOME Sensors 自己在软件中心搜索下吧

    OK,祝大家在Linux下玩的愉快

    展开全文
  • Ubuntu 查看CPU温度

    2015-03-14 16:29:00
    按照这篇文章:http://www.webupd8.org/2014/06/psensor-updated-with-option-to-display.html 转载于:https://www.cnblogs.com/platero/p/4337772.html

    按照这篇文章: http://www.webupd8.org/2014/06/psensor-updated-with-option-to-display.html

    转载于:https://www.cnblogs.com/platero/p/4337772.html

    展开全文
  • ubuntu 杂谈(二)ubuntu 查看CPU温度

    千次阅读 2014-04-28 11:44:23
    1.安装

    1.安装

    2.使用效果



    展开全文
  • cat /sys/class/thermal/thermal_zone0/temp or cat /sys/devices/virtual/thermal/thermal_zone0/temp ...每隔1秒自动检测一次cpu温度 watch -n 1 cat /sys/devices/virtual/thermal/thermal_zone0/temp
    cat /sys/class/thermal/thermal_zone0/temp
    

    or

    cat /sys/devices/virtual/thermal/thermal_zone0/temp
    

    每隔1秒自动检测一次cpu温度

    watch -n 1 cat /sys/devices/virtual/thermal/thermal_zone0/temp
    
    展开全文
  • Ubuntu-查看cpu温度

    千次阅读 2018-08-01 13:41:29
    正在处理用于 systemd (229-4ubuntu21.1) 的触发器 ... 正在处理用于 ureadahead (0.100.0-19) 的触发器 ... ureadahead will be reprofiled on next reboot 正在设置 lm-sensors (1:3.4.0-2) ... 正在处理用于 ...
  • ubuntu配置CPU温度监控

    千次阅读 2009-11-04 11:20:00
    ubuntu配置CPU温度监控时间:2008-11-21 10:29:33 来源:Linux联盟收集整理 作者:<!--google_ad_client = "pub-3701573918329010";/* 300x250, 创建于 08-9-9 */google_ad_slot = "1645276672
  • 夏天到了,这几天本本的温度也飙升起来,在WinXP下玩了会CS,结果CPU一下就到了80度,吓得我赶紧关了。 下午Win7 64位旗舰版也下载完了,准备体验一下,就装个系统,网页都不浏览的情况下CPU居然60多度。然后...
  • 实时查看ubuntu系统的cpu温度

    千次阅读 2020-05-14 18:32:32
    实时查看树莓派cpu温度 ** 命令行中输入 ** watch -n 0.1 cat /sys/class/thermal/thermal_zone0/temp 就看一眼 cat /sys/class/thermal/thermal_zone0/temp
  • Ubuntu查看CPU温度

    2010-11-17 16:58:53
    Ubuntu查看CPU温度的步骤,以下所有步骤,如果有yes/no的选项,都选yes. 1. 安装lm-sensors,打开终端键入: [code="java"]sudo apt-get install lm-sensors sensors-applet[/code] 2. 手动配置...
  • Ubuntu查看电脑CPU温度

    万次阅读 2018-05-08 08:35:35
    Ubuntu查看电脑CPU温度 1:sudo apt-get install lm-sensors hddtemp 2:sudo sensors-detect 3:sensors 4:sudo apt-get install psensor 5:psensor 6:done! 7:参考文献: 【1】 ...
  • Linux Ubuntu 查看cpu信息

    2021-06-22 13:23:56
    Linux查看cpu信息:cat /proc/cpuifo
  • Ubuntu 14.04 下读取CPU温度

    千次阅读 2017-05-26 10:47:32
    百度上查看CPU温度的大多数都是安装lm_sensors,使用sensors命令返回温度,不知道是源还是什么的原因,本人Ubuntu 14.04下无法安装lm_sensors,只能通过shell命令查看。 通过shell命令查看CPU温度: cd /sys/class...
  • 使用Ubuntu电脑一直很烫,想要实时查看CPU温度,我的电脑已有System Monitor,不想下载Psensor,所以做法如下: 1、ctrl+Alt+t打开终端,输入: sudo add-apt-repository ppa:fossfreedom/indicator-sysmonitor ...
  • ubuntu查看监控cpu等硬件温度

    千次阅读 2012-02-05 23:11:22
    [原贴]:http://www.stuhack.com/article/wenda/hardware/65419.html 1. sudo apt-get install lm-sensors sensors-applet ...  ...3. 接下来,我们在想要显示传感器温度的面板位置右键,选择“添加...
  • 安装模块 sudo apt-get install lm-sensors 配置zabbix-agent vim /etc/zabbix/zabbix-agentd.conf,...UserParameter=get_temp_cpu[*],sensors|grep "temp1" |cut -c 16-19 配置监控项 get_temp_cpu[0] OK.
  • Linux 查看CPU温度

    千次阅读 2019-09-04 17:05:09
    每种设备查看温度的方式都不同。 树莓派 无需安装工具即可查看: cat /sys/class/thermal/thermal_zone0/temp >>> 62838 # 或者直接以度为单位显示 echo $[$(cat /sys/class/thermal/thermal_zone0/...
  • Ubuntu环境下检查CPU温度

    千次阅读 2017-08-23 21:56:59
    本篇中,我们会了解如何在Ubuntu中检查CPU温度。 我们将使用一个GUI工具Psensor,它允许你在Linux中监控硬件温度。用Psensor你可以: 监控cpu和主板的温度监控NVidia GPU的文档监控硬盘的温度监控...
  • Lm_sensors是一个命令行工具,用于显示所有芯片传感器数据的当前读数,包括CPU温度。默认情况下,Ubuntu LInux没有安装Lm_Sensors,因此,我们必须自己安装它们。 bob@bob-PC:~$ sudo apt install lm-sensors ...
  • 树莓派查看cpu温度

    2019-06-19 16:55:00
    树莓派查看cpu温度 $ cd /sys/class/thermal/thermal_zone0 $ cat temp 返回值除以1000 为当前cpu的摄氏温度
  • 添加CPU温度监控软件,执行: sudo apt-get install sensors-applet 添加HD温度监控软件: sudoapt-get install hddtemp sudo hddtemp -n /dev/sda #检测温度安装完成后在需要添加的面板上右键,选择“添加到面板”...
  • Linux如何查看CPU温度

    万次阅读 2015-06-11 18:12:14
    下面介绍Linux下查看CPU温度的方法. CentOS系列:  1.yum install lm_sensors; 2.sensors-detect 3.sensors Ubuntu系列: 1.apt-get install lm-sensors 2.sensors-detect 3.service kmod start 4.sensor
  • 现在购买主机板时都会有厂商提供的监控软体可以使用,而最常使用到到功能像温度监控,系统状态等等,但是这些软体都只能在windows下使用,所以如果要在Linux下监控CPU温度,可以透过lm-sensor这套软体来监控。...
  • 树莓派查看cpu温度的命令

    千次阅读 2019-12-31 20:42:13
    /opt/vc/bin/vcgencmd measure_temp 或者直接输入以下命令 vcgencmd measure_temp
  • ubuntu18.04实时显示网速CPU温度

    万次阅读 2018-11-29 20:43:52
    网上很多使用GNOME Shell integration 插件,但是本人还是喜欢以前的sysmonitor来显示网速 CPU温度等 1、添加源 sudo add-apt-repository ppa:fossfreedom/indicator-sysmonitor 2、更新源 sudo apt-get ...
  • 树莓派查看CPU温度

    2020-10-13 15:35:29
    cat /sys/class/thermal/thermal_zone0/temp 把得到的值除1000得到CPU温度(℃) 这里是37.5度
  • ubuntu 9.10下的/var/log下 syslog messages kern.log 这三个文件变得very very very big,不知道这个解决办法通不通用,不过还是说出来,试试吧。刚刚在...
  • 本篇中,我们会了解如何在Ubuntu中检查CPU温度。 我们将使用一个GUI工具Psensor,它允许你在Linux中监控硬件温度。用Psensor你可以: 监控cpu和主板的温度 监控NVidia GPU的文档 监控硬盘的温度 监控风扇的速度 ...

空空如也

空空如也

1 2 3 4 5 ... 20
收藏数 2,138
精华内容 855
关键字:

ubuntu查看cpu温度