Qline Edit主要用于与少量文本交互的地方，如用户名、密码等；

Qtext Edir主要用于文本的显示，也可以显示HTML文本，

QPlain Text主要用于与文本交互的方面。

 

1、方法一：设置编辑框变量

（1）在MFC的基本对话框中,创建一个编辑框控件,为控件添加一个类型为CEdit的变量 m_Edit 。

CString str;

m_Edit.GetWindowText(str);
（2）

在MFC的基本对话框中,创建一个编辑框控件,为控件添加一个类型为CString的变量 m_Edit ，m_Edit 就是编辑框内的值。

CString str;

str.Format(m_Edit);
2、方法二：通过ID获取

CString str;

GetDlgItem(IDC_EDIT)->GetWindowText(str);

AfxMessageBox(str);

原文：https://blog.csdn.net/weixin_40026797/article/details/83903473 1.第一种
1

通过GetDlgItem和GetWindosText

char szEdit[10] = {0};

int nEdit = 0;

GetDlgItem(IDC_EDIT1)->GetWindowText(szEdit, 10); //获取

nEdit = atoi(szEdit);

GetDlgItem(IDC_EDIT2)->SetWindowText(szEdit);    //写入

调用atoi函数可将获取到的值直接转换成整型。itoa作用相反。
2.第二种

通过GetDlgItemText

char szEdit[10] = {0};

GetDlgItemText(IDC_EDIT1, szEdit, 10); //获取

SetDlgItemText(IDC_EDIT2, szEdit);     //写入
3.第三种

通过GetDlgItemInt，只能获得整型数值

int nEdit = 0;

nEdit = GetDlgItemInt(IDC_EDIT1);

写入调用SetDlgItemInt();
4.第四种

通过类向导建立和编辑框关联的变量
1）数据型变量

（1）读取数据

UpdateData(TRUE);   //从编辑框中获取数据到关联变量

（2）写入数据

UpdateData(FALSE);  //关联变量的值更新到编辑框中

2）关联编辑框类型变量

char szEdit[10] = {0};

m_Edit.GetWindowText(szEdit, 10);

m_Edit.GetWindowText(szEdit);

m_Edit是CEdit类型的变量。

原文：https://blog.csdn.net/C_gyl/article/details/66972310

最近在看内核地址转换相关的内容 用到了 hexedit 发现 没有相关的说明，所以自己学习后简单写一下

hexedit(1) - Linux man page

hexedit 是查看和编辑十六进制或 ASCII 文件的工具
hexedit [-s | --sector] [-m | --maximize] [-h | --help] [filename]
Hexedit 同时以 ASCII 和十六进制显示文件。文件可以是一个设备，因为文件是一次读取一个片段。您可以修改文件并在其中搜索。
可选操作：
-s, --sector    将显示设置为包含整个扇区
-m, --maximize  尽量把显示效果最大化。

快速命令
进入编辑器以后直接按键即可操作的命令
移动
<,> :  转到文件的开头/结尾

Right:  下一个字符

Left:   前一个字符

Down:   下一行

Up:     前一行

Home:   行的第一个字符

End:    行的最后一个字符

PUp:    向上翻页

PDown:  向下翻页
其他命令
F2:     保存

F3:     打开其他文件

F1:     帮助

Ctrl-L: redraw

Ctrl-Z: 暂时停办（推出后使用fg回来，使用jobs 查看 停办的任务）

Ctrl-X:保存并推出

Ctrl-C: 退出不保存

Tab:    hex和ascii之间切换

Return: 跳到指定地址（不区分大小写）

Backspace: 撤消前一个修改的字符

Ctrl-U: 撤销所有的修改

Ctrl-S: 向前搜索 16进制值

Ctrl-R: 向后搜索 16进制值
剪切粘贴
Ctrl-Space: set mark

Esc-W:  copy

Ctrl-Y: paste

Esc-Y:  paste into a file

Esc-I:  fill
命令详解
上下左右箭头用来移动光标一个字符
Ctrl+F, Ctrl+B（上下页） Ctrl+N, Ctrl+P（上下行） 移动光标.
Ctrl+Right-Arrow, Ctrl+Left-Arrow, Ctrl+Down-Arrow, Ctrl+Up-Arrow 移动 n 次光标 （有时候没有用）
Esc+Right-Arrow, Esc+Left-Arrow, Esc+Down-Arrow, Esc+Up-Arrow 移动 n 次光标
Esc+F, Esc+B,（左右N次） Esc+N, Esc+P（上下N次）移动 n 次光标
Home, Ctrl+A - go the beginning of the line.
End, Ctrl+E - go to the end of the line.
Page up, Esc+V, F5 - go up in the file by one page.
Page down, Ctrl+V, F6 - go down in the file by one page.
<, Esc+<, Esc+Home - go to the beginning of the file.
>, Esc+>, Esc+End - go to the end of the file (for regular files that have a size).
Ctrl+Z - suspend hexedit.
Ctrl+U, Ctrl+_, Ctrl+/ - undo all (forget the modifications).
Ctrl+Q - read next input character and insert it (this is useful for inserting control characters and bound keys).
Tab, Ctrl+T - toggle between ASCII and hexadecimal.
/, Ctrl+S - search forward (in ASCII or in hexadecimal, use TAB to change).
Ctrl+R - search backward.
Ctrl+G, F4 - go to a position in the file.
Return - go to a sector in the file if --sector is used, otherwise go to a position in the file.
Esc+L - display the page starting at the current cursor position.
F2, Ctrl+W - save the modifications.
F1, Esc+H - help (show the man page).
Ctrl+-, F3 - open another file
Ctrl+L - redisplay (refresh) the display (usefull when your terminal screws up).
Backspace, Ctrl+H - undo the modifications made on the previous byte.
Esc+Ctrl+H - undo the modifications made on the previous bytes.
Ctrl+Space, F9 - set mark where cursor is.
Esc+W, Delete, F7 - copy selected region.
Ctrl+Y, Insert, F8 - paste (yank) previously copied region.
Esc+Y, F11 - save previously copied region to a file.
Esc+I, F12 - fill the selection with a string
Esc+T - truncate the file at the current location
Ctrl+C - unconditional quit (without saving).
F10, Ctrl+X - quit.

For the Esc commands, it sometimes works to use Alt instead of Esc. Funny things here (especially for froggies 😃 egrave = Alt+H , ccedilla = Alt+G, Alt+Y = ugrave.

Modeline

At the bottom of the display you have the modeline (copied from emacs). As in emacs, you have the indications --, ** and %% meaning unmodified, modified and read-only. Then you have the name of the file you’re currently editing. Next to it is the current position of the cursor in the file followed by the total file size. The total file size isn’t quite correct for devices.

While in --sector mode, it shows the sector the cursor is in.

Editing

You can edit in ASCII or in hexadecimal. You can switch between the two with Tab. When the file is read-only, you can’t edit it. When trying to edit a read-only file, a message (’‘File is read-only’’) tells you it is non-writable.

The modifications are shown in bold until they are saved. The modeline indicates whether you have modified the file or not.

When editing in hexadecimal, only 0,1,…,9, a,b,…,f, A,B,…F are legal. Other keys are unbound. The first time you hit an unbound key, the help pops up. It won’t pop again unless you call the help directly (with F1).

When editing in ascii, you can find it difficult to enter characters like / which are bound to a function. The solution is to use the quoted insert function Ctrl+Q, the key after the quoted insert function is not processed by hexedit (like emacs’ quoted-insert, or like the \ character in C).

Searching

You can search for a string in ASCII or in hexadecimal. You can switch between the two with Tab. If the string is found, the cursor is moved to the beginning of the matching location. If the search failed, a message (’‘not found’’) tells you so. You can cancel the search by pressing a key.

The search in hexadecimal is a bit confusing. You must give a hexadecimal string with an even number of characters. The search can then be done byte by byte. If you want to search a long number (eg: a 32 bit number), you must know the internal representation of that number (little/big endian problem) and give it the way it is in memory. For example, on an Intel processor (little endian), you must swap every bytes: 0x12345678 is written 0x78563412 in memory and that’s the string you must give to the search engine.

Before searching you are asked if you want to save the changes, if the file is edited.

Selecting, copying, pasting, filling

First, select the part of the buffer you want to copy: start setting the mark where you want. Then go to the end of the area you want to copy (you can use the go to function and the search functions). Then copy it. You can then paste the copied area in the current file or in another file.

You can also fill the selected area with a string or a character: start choosing the block you want to fill in (set mark then move to the end of the block), and call the fill function (F12). hexedit ask you the string you want to fill the block with.

The code is not tuned for huge filling as it keeps the modifications in memory until you save them. That’s why hexedit will warn you if you try to fill in a big block.
When the mark is set, the selection is shown in reverse mode.

Be aware that the copied area contains the modifications done at the time of the copy. But if you undo the modifications, it does not change the content of the copy buffer. It seems obvious but it’s worth saying.
Scrolling

The scrolling is different whether you are in --sector mode or not. In normal mode, the scrolling is line by line. In sector mode, the scrolling is sector by sector. In both modes, you can force the display to start at a given position using Esc+L.

See Also

od(1), hdump(1), hexdump(1), bpe(1), hexed(1), beav(1).

Author

Pixel (Pascal Rigaux) pixel@merd.net,

Home page is http://merd.net/pixel/.

Unrestrictions

hexedit is Open Source; anyone may redistribute copies of hexedit to anyone under the terms stated in the GNU General Public License.

You can find hexedit at

http://merd.net/pixel/hexedit-1.2.10.src.tgz and

http://merd.net/pixel/hexedit-1.2.10.bin.i386.dynamic.tgz.
Todo

Anything you think could be nice…

Limitations

There are problems with the curses library given with Redhat 5.0 that make hexedit think the terminal is huge. The result is that hexedit is not usable.

The shortcuts work on some machines, and not on others. That’s why there are many shortcuts for each function. The Ctrl+Arrows and the Alt+. do not work work as they should most of the time. On SUNs, you must do Ctrl+V-Ctrl+V instead of Ctrl+V (!); and the Alt key is the diamond one.
While searching, it could be interesting to know which position the search has reached. It’s always nice to see something moving to help waiting.
The hexadecimal search could be able to search modulo 4 bits instead of 8 bits. Another feature could be to complete padd odd length hexadecimal searches with zeros.
Bugs

I have an example where the display is completly screwed up. It seems to be a bug in ncurses (or maybe in xterm and rxvt)?? Don’t know if it’s me using ncurses badly or not… It seems to happen when hexedit leaves only one space at the end of the lines… If anyone has a (or the) solution, please tell me!

If you have any problem with the program (even a small one), please do report it to me. Remarks of any kind are also welcome.

Referenced By

guestfish(1)

在用Duilib轻量级UI库中，有时候在ListUI中要嵌入单元格，有人可能会考虑用RichEdit，有人考虑用Label，总的来说都还是相当不错的，但是RichEdit在List的滚动条滑动时字体的textpadding会失效，这就尴尬了，所以还是推荐使用Label，经劳资多方认证用Label还是相当不错的，能解决大部分难题，当然如果你想要添加Combo的话可以使用RichEdit，能极大有效的辅助解决难题。

 

深圳程序员交流群，欢迎高端人士入驻

550846167